H11/1.2343 Hot Work Tool Steel Following NADCA standard
Product Details
Chemical Composition (%)
|
Standard |
Steel Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
W |
|
DIN |
- |
|||||||||
|
ASTM |
H11 |
030-0.60 |
- |
|||||||
|
GB |
4Cr5MoSiV |
- |
Specification
|
Round bar |
Diameter |
Length |
- |
|
Forged round bar: φ50~450 |
2000~6000 |
- |
|
|
Rolled round bar: φ10~80 |
2000~6000 |
- |
|
|
Flat bar |
Thickness(mm) |
Width(mm) |
Length(mm) |
|
Forged plate: 20~300 |
50~710 |
2000~6000 |
|
|
Rolled plate: 10~65 |
155~610 |
2000~6000 |
|
DIN |
AISI |
JIS |
GB |
|
H11 |
SKD6 |
4Cr5MoSiV |
Chemical Composition (DIN 17350)
|
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
Steel Properties
Deep hardening response. It can be air hardened to full working hardness in section sizes up to 150mm. Good combination of toughness, hardness and wear resistance in hot. Resistance to softening and to cracking. Tools canbe water cooled. Following NADCA standard.
Applications
Tools with a broad range of working hardness up to tool working temp. 500 degree. Tools for hot forging of light metals. Pressure die casting tools, dies, mandrels, punchers, knives, and moulds.
Heat Treatment
|
Soft Annealing(℃) |
Cooling |
Hardness(HB) |
Hardening(℃) |
In |
Hardness(HRC) |
|
800-840 |
Furnace |
1010-1040 |
In air, oil, thermalbath 450-550℃ |
50-56 HRC |
|
Tempering(℃) |
100 |
200 |
300 |
400 |
450 |
500 |
550 |
600 |
650 |
700 |
|
HRC |
53 |
52 |
52 |
52 |
52 |
54 |
52 |
48 |
38 |
30 |
|
N/mm2 |
1845 |
1790 |
1790 |
1790 |
1790 |
1910 |
1790 |
1570 |
1200 |
970 |
,based on the over one hundred years’s production history of in Huangshi, provide professional services and material for cutting tool companies, mould companies and other industrial enterprises all over the world for years.
在线联系供应商
Other supplier products
 |
Cr12Mov Cold Work Tool Steel Plates Bars Sheet Forgings | Used to manufacturing all kinds of moulds and tools with comparatively larger cross sections and complex shapes, which can bear heavy shock loads.... |
 |
Air-hardening A8 Mod Cold Work Tool Steel Plates Bars Sheet Forgings | Product Details A8 is an air-hardening cold work tool steel. It exhibits good wearing qualities with excellent toughness characteristics. It is we... |
 |
1.2316/3Cr17Mo Plastic Mold Tool Steel Plates Bars Sheet Forgings | Product Details Specification Round bar Diameter(mm) Length(mm) - Forged round bar：φ50~450 2000~6000 - Rolled round bar：&... |
 |
S5 Cold Work Tool Steel Plates Bars Sheet Forgings | Preheating: Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677&de... |
 |
45CrNi4Mo/1.2767 Hot Work Tool Steel Plates Bars Sheet Forgings | Product Details Chemical composition C Mn Si Cr V Mo P S - ≤0.03 ≤0.03 Equivalent grades: DIN AFNO... |
Same products
 |
Steel Press Fittings Coupling | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Product Variety: Coupling (DDS Coupling ),Long coupling ,Reducer Coupling Size：DN20-D... |
 |
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... |
 |
Special Clearance 1.9" N80 NUE Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
DS55/HT55/HST55 4145h Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
X-over 3-7/8"CAS 2Cr13 Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
