SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. Its products can be the largest in the steel fiber family and are widely used in road bridge expansion joints and large-scale water conservancy and hydropower reinforcement projects.
The Specification of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
Name |
SD-05035 |
Type |
Loose |
Diameter |
|
Length |
35mm |
L/D(length/diameter) |
70 |
Tensile strength |
>1150Mpa |
Application |
shotcrete |
The Advantages of SDS-05035 0.50mm Diameter 30mm Length Hooked End Steel Fiber
Easier operation and less time-consuming;
High toughness and lower thickness;
Integrated, no pores, more efficient;
Less time used, and more economical;
Compared with traditional concrete, more economical and efficient.
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
SDS is one of the top steel fiber supplier, we provide fibers used in concrete, 0.5 mm steel wire, steel fibers for concrete reinforcementand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
Steel Fibers For Crack Control | Steel Fibers For Crack Control Why we use steel fiber for cracking control? The steel fiber has a high tensile strength of 1000Mpa, which could... | |
Steel Fibers For Durability | Steel Fibers For Durability The tensile strength of SDSsteel fiberreinforced is more than 1150MPa, and it will not be broken when concrete is subj... | |
SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber | This fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute... | |
SDS Glued Hooked End Steel Fiber | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bulked could make sure it has good dispersibility in... | |
SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber | This fiber is a high-performance hooked steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a sub... |
Same products
Centrifugally cast Chromium-Nickel alloy tubes | 卖方: Nanjing Xinshuo Mechanical Equipment Co., Ltd. | Centrifugally cast Chromium-Nickel straight alloy tubes | |
White Iron Wear Blocks, Wear Bars | 卖方: Yiwu WALKSON Machinery Equipment Co., Ltd. | The unique, formable designed wear bars is available in various lengths, grades and sizes and can... | |
TITANIUM ALLOY STEEL TUBE | 卖方: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | TITANIUM ALLOY STEEL TUBE Titanium is the ninth most abundant element in the earth's crust and t... | |
STEEL FITTING | 卖方: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STEEL FITTING Steel has been used for making pipe and pipe fittings for years for its durability... | |
STAINLESS STEEL PIPE/TUBE | 卖方: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufactur... |