SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. Its products can be the largest in the steel fiber family and are widely used in road bridge expansion joints and large-scale water conservancy and hydropower reinforcement projects.
The Specification of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
Name |
SD-05035 |
Type |
Loose |
Diameter |
|
Length |
35mm |
L/D(length/diameter) |
70 |
Tensile strength |
>1150Mpa |
Application |
shotcrete |
The Advantages of SDS-05035 0.50mm Diameter 30mm Length Hooked End Steel Fiber
Easier operation and less time-consuming;
High toughness and lower thickness;
Integrated, no pores, more efficient;
Less time used, and more economical;
Compared with traditional concrete, more economical and efficient.
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
SDS is one of the top steel fiber supplier, we provide fibers used in concrete, 0.5 mm steel wire, steel fibers for concrete reinforcementand etc. Want to know more? Please contact us.
Send product request
Other supplier products
SDS Loose Hooked End Steel Fiber | Hooked end steel fiberwas made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance.... | |
SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber | This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times c... | |
SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber | This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times c... | |
SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber | The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times cont... | |
SDS Glued Hooked End Steel Fiber | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiberin bulked could make sure it has good dispersibility in ... |
Same products
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... | |
Special Clearance 1.9" N80 NUE Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... | |
DS55/HT55/HST55 4145h Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... | |
X-over 3-7/8"CAS 2Cr13 Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... | |
JFE BEAR Thread Type Super 13Cr Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |