Forged Flanges
FORGED FLANGES
We are forged flanges manufacturer, supplier and exporter for a wide range of quality industrial forged steel pressure flanges including welding neck flange, slip-on flanges, socket weld flanges, blind flanges and other shapes for connection applications in the oil, gas, chemical, wind, pharmaceutical and other industries, manufactured in accordance with ASME , DIN, JIS, GB, ANSI, GOST, EN, BS and other engineering standards.
Forged Flanges Types
Pipe flange facing of america system, ring joint face except raised face, large or smalltongue face and groove face, large or smallmale face and female face, all can be manufactured according to standard.
Orifice flange equipped with orifice plate is used to measure the flow.Theere are two symmetrical, radial through holes in flange which is parallel to the sealed face.The distance to the sealed face is 0.94inch(23.9mm). They are equipped with two plugs of size NPT 1/2 mating the threaded hole in the outer end. The diameter of through holes as following.
Forged Flanges Type：
SW;WN;SO;BL;LJ;TH ; FF,RTJ
Forged Flanges Forming:
Forged
Forged Flanges Size:
1/2”—120”
Forged Flanges Standard:
GB9112~9124, GB13402, SH3406, HG20615~20623, HG20592~20605, JB74~90, ISO7005-I, ASME/ASNI B16.5/16.36/16.47A/16.47B, MSS SP44, JIS B2220-2001, DIN 2527/2636/2637/2638/2566/2576/2632/2633/2635/2642/2653/2655/2656, DIN2628/DIN2629, DIN2634 , BS 1560-3.1, BS4504-3.1, API 7S-15, API 7S-43, API 605, NFE 29-203 GOST12821 GOST 12820
Forged steel flangesRating:
ANSI 150LBS~2500LBS
DIN PN6~PN400
JIS 5K~30K
HG PN0.25~PN25
Forged Flanges Material:
Stainless Steel ：
OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H, F317,
Super Stainless Steel:
ASTM A182-904L, 317, 317L
Duplex Steel：
ASTM A182-F51, F53, F44
Special Steel ：
N06600, N08800, N08811
Alloy Steel：
16Mn, 12CrMo, 15Cr5Mo, Cr5Mo, 12Cr1MoV, ASTM A182-F11, F22, F91 F9 F5
Pipe Line：
ASTM A694-F42, F46, F48, F50, F52, F56, F60, F65, F70, F80
Carbon Steel ：
ASTM A350-LF2, LF3 Q235A, 20#, ASTM A105
Tolerance of flange (ASME /ANSI standard)
|
Thread ,Socket-welding,Slip-on, Lap joint and Blind flange Tolerence |
Welding neck raised face flange tolerence |
||||
|
Outside Diameter |
≦24" |
±1.6mm |
Outside Diameter |
≦24" |
±1.6mm |
|
>24" |
±3.2mm |
>24" |
±3.2mm |
||
|
Inside Diameter |
Threaded |
Within limits on boring gauge |
Inside Diameter |
≦10” |
±0.8mm |
|
Socket-welding |
ID≦10"+0.8mm ID≧12"+1.6mm |
<20” |
±1.6mm |
||
|
Slip on |
≧20” |
-1.6mm +3.2mm |
|||
|
Lap joint |
Diameter of hu at base |
≦24” |
±1.6mm |
||
|
Outside Diameter of Hub |
≦5" |
+2.4mm -0.8mm |
>24” |
±3.2mm |
|
|
≧6" |
+ 4.0mm -0.8mm |
Diameter of hub at point of welding |
≦5" |
-0.8mm +2.4mm |
|
|
Diameter of contact face |
1/16”raised face |
±0.8mm |
≧6" |
-0.8mm +4.0mm |
|
|
1/4”raised face tongue&groove male,female |
±0.4mm |
Diameter of contact face |
1/16”raised face |
±0.8mm |
|
|
Diameter of counterbore |
Same as for inside diameter |
1/4”raised face tongue&groove male,female |
±0.4mm |
||
|
Drilling |
Bolt circle |
±1.6mm |
Drilling |
Bolt circle |
±1.6mm |
|
Bolt hole spacing |
±0.8mm |
Bolt hole spacing |
±0.8mm |
||
|
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
Eccentricity of bolt circle with respect to facing |
<2-1/2” Max 0.8mm ≧3” Max 1.6mm |
||
|
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
Eccentricity of bolt circle with respect to bore |
Max 0.8mm |
||
|
Eccentricity of facing with respect to bore |
Max 0.8mm |
Eccentricity of facing with respect to bore |
Max 0.8mm |
||
|
Thickness |
≦18” |
0-+3.2mm |
Thickness |
≦18” |
1-+3.2mm |
|
≧20” |
0-+4.8mm |
≧20” |
1-+4.8mm |
||
|
Length thru hub |
≦10” |
±1.6mm |
Length thru hub |
≦10” |
±1.6mm |
|
≧12” |
±1.6mm |
≧12” |
±1.6mm |
||
在线联系供应商
Other supplier products
 |
Equal Tee | Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a ... |
 |
Hydraulic Tubing | Product description Hydraulic Tubing Description Huashang Hydraulic tube in a comprehensive range of corrosion-resistant stainless steels and nic... |
 |
Stub End | Product description We are a stub end manufacturer, supplier and exporte, stub end divided into Europe system, Japan system, America system and lap... |
 |
Weld Neck Flanges | Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flangeare popularly used in excessive stress applications, with... |
 |
Aerospace Tubing | Product description Aerospace Tubing Description HUASHANG affords a broad range of grades and dimensions of stainlesss steel ams 5581 tubingfor t... |
Same products
 |
PVD Coated 430 HL Champagne Gold Stainless Steel Sheet | 卖方: Hongwang Holding Group | PVD Coated 430 HL Champagne Gold Stainless Steel Sheet Color Chrome,Ti-gold, Cham... |
 |
Grade 304L 316 HL Ti-gold Stainless Steel Coils | 卖方: Hongwang Holding Group | Color Chrome, Matte Black, Hairline Ti-black, Mirror Ti-black,Ti-gold, Champgne Gold... |
 |
Customized Grade EN 1.4301 Stainless Steel 1280mm Width X5CrNi18-10SS Sheet and Plate | 卖方: Hongwang Holding Group | Finish HL Grade 200 Series / 300 Series / 400 Series Standard QB / GB / ASTM / JIS / EN Thickness... |
 |
304 Grade 8K Mirror Finished Stainless Steel Coil | 卖方: Hongwang Holding Group | Finish 8K mirror N0.8 surface finished Grade 304 Series 304 grade orCu... |
 |
Hot Rolled No.2E Surface 201J1 Stainless Steel Coils | 卖方: Hongwang Holding Group | Finish Grade 200 Series / 300 Series / 400 Series Standard ... |
