Carbon fiber chopped strand/ chopping carbon/ carbon fiber
Carbon fiber chopped strand/ chopping carbon/ carbon fiber
It is 1-80mm, cutting from carbon fiber yarn. It is base material of function material modified that is used for carbon fiber FRP, friction material and other function material FRP.
Feature
PAN chop, high performance, suitable for aerospace industry;
no glue, good compatibility and dispersibility
LowOhms, good electrical conductivity and electromagnetic wave screening, high thermal conductivity
It could increase product strength and modulus
low coefficient thermal expansion, high stability
high fatigue resistance, good abrasive resistance and lubricity
Application area
Space navigation and national defense: man-made satellite, airship, rocket, missile shell
Reinforcement modified plastic: PA,PP,PC,PF,PTFE,PI,EP etc.
Construction: concrete reinforce, frp bar, reinforce product, electrical conduction painting, anti-static terrace
Electric heating: electrical conduction paper, electric hot plate, electric conduction mat, needle mat, electric conduction blanket
Communications and transportation: racing bicycle, brake pad, live shaft, crossbeam, empennage, bonnet, leaf spring
Shield material: protective shield, smog, curtain
Industry: base installation, recovery gas oil, pressure vessel, composite stick, voyage construction member,
Heat insulation or preservation: reinforce body, brick, ceramics
Sport leisure: fishing rod, brassie, shaftment, bicycle stand, quant, sled
New energy: wind power, flywheel, electrode of fuel battery
Medical treatment: artificial ligament
Parameter
|
Carbon content: 96% |
Tensile strength: 3800MPa |
|
Tensile modulus: 228GPa |
density: 1.75g/cm3 |
|
Ohms ratio: 1.0-1.6Ωcm |
diameter: 7μm |
|
Section shape: round |
Bulk density: 0.4g/cm3 |
|
Chop length: 1mm-80mm |
在线联系供应商
Other supplier products
 |
Carbon aramid fiber hybrid fabric | Carbon aramid fiberhybridfabric HybridFabrics are woven by more than two kinds of different fiber materials (Carbon fiber, Aramid fiber, Fiberglass... |
 |
High strength unidirectional fabric/ s-glass cloth | High strength unidirectional fabric/ s-glass cloth High strength unidirectional fabric made through a hot melt process employing HS fiberglass rovi... |
 |
PTFE heat resistant fabric | PTFE heat resistant fabric It is made of import fiberglass after plain weaving or other braided. Then it is process by special craft, soaking, dipp... |
 |
E-Glass Chopped Strand Mat | E-Glass Chopped Strand Mat E-Glass Chopped Strand Mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It... |
 |
Low dielectric loss glass fibe | Low dielectric loss glass fiber Low dielectric names D glass fiber, have D3, Dk series. It is low density, low dielectric constant and low dielectr... |
Same products
 |
再结晶碳化硅喷火嘴 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅烧嘴套特点： 1700℃使用温度； 抗氧化能力强寿命长； 提高燃烧效率，节能环保； 支持订制任意形状，方便安装维修； |
 |
重结晶碳化硅精磨板 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 唐山星斗碳化硅出品的的碳化硅重结晶板精磨后具有更光滑平整的表面，更高的纯度，广泛用于ITO靶材、电子陶瓷的窑炉中。 精磨后的重结晶碳化硅棚板具备如下特点： 超薄厚度，可做1mm 光滑平整的... |
 |
重结晶碳化硅板(棚板 / 承烧板) | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅板，也称重结晶碳化硅棚板，再结晶碳化硅板，碳化硅承烧板，碳化硅窑炉底板，纯碳化硅陶瓷板，碳化硅隔焰板，等等。较其它材料，同等工况下厚度可以更薄，使用温度可达1700℃，高温高承载力和... |
 |
重结晶碳化硅管 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅管，也称再结晶碳化硅管，作为高温窑炉的核心窑具，热电偶保护管，炉管，星斗公司出品的高温碳化硅管具备1650摄氏度下不变形，直线度好，圆度好，抗氧化能力强等优点。唐山星斗碳化硅陶瓷有限... |
 |
氮化硅结合碳化硅梁/横梁/立柱 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 星斗公司出品的氮化硅结合碳化硅方梁，作为各种陶瓷窑炉的承载结构架，安全使用温度可达1450C，采用可靠的注浆成型工艺，经两次烧成，密度更均匀更大，完美的抗氧化、抗折强度，厚度更薄，重量更轻，导热... |
