PP Automotive Weather Stripping Bonding Adhesive Coated Aluminum Alloy Core
PP Automotive Weather Stripping Bonding Adhesive Coated Aluminum Alloy Core
PP Automotive Weather Stripping Bonding Adhesive Coated Aluminum Alloy CoreSpecial Advantages
PP Material
PP materials have many good characteristics. As a type of material which is applied widely in packaging industry, PP material has good mechanical strength. PP materials also have high chemical resistance and high heating resistance.
Two-coat Paint Systems
The two-coat paint system generally refers to a primer and a topcoat on the same side of the strip. The pretreatment also know as “conversion coat”, is not consisdered a coating and is applied in addition to the primer and topcoat. Therefore, a two coat system generally consists of the pretreatment, a primer and the topcoat.
Automotive Weather Stripping With Aluminum Alloy CoreApplication
Primers are formulated to offer superior adhesion between the aluminum substrate and the topcoat which can be called a bonding agent to bond a vast range of elastomers to metals and plastics during the moulding process.
KING PLASTICAluminium stripis widely used for the lining of the automotive seal strips. To bond with different plastics ans rubbers(PP, PE, PVC, EPDM, TPE, TPU etc), relevant coated aluminium strips is necessary.
The slitting line ofPP coated with adhesive automotive weather stripping aluminum alloy core
lDesigned for slitting of narrow and thin coils in soft conditions, ensures:
lNo sticky winding and no staining;
lLess manipulation after slitting, less risk for damage and contamination;
lUniform tension throughout the whole coil via most accurate control systems;
lConsistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.
Chemical degreaselineof PP coated with adhesive automotive weather stripping aluminum alloy core
lOur material for multi-layer pipes has a special chemical degreased surface for excellent adhesion between aluminium and polyethylene
lIt is proven by peeling tests on different types of pipes that the adhesion with chemically degreased aluminium is much better than with only thermally degreased aluminium.
PACKAGE CONDITIONS
Packing details:
lNormally, for aluminium strip, 20MT can be loaded into 20 foot container,we suggest to use20 foot container,the sea freight rate is much cheaper than 40 foot container.
lthe packing is very strong, which has 3 lays, thick fiber, foam, plastic,enough drying agent, suitable for long distance sea transportation.
lWe use wooden pallet and steel pallet according to customer request;
lWooden boxes will be used in the outside packing.
lWe have fixing in the container to avoid any damage during the transportation.
|
PP Automotive Weather Stripping Bonding Adhesive Coated Aluminum Alloy Core |
||
|
Aluminum Alloy |
5754 |
|
|
Temper |
H22, 24, 26, 28 |
|
|
Surface Treatment |
Roll coating |
|
|
Specification |
Thickness |
|
|
Width |
7-1500mm |
|
|
Length |
1500-2000m |
|
|
Coating Thickness |
5-30micron |
|
|
Core |
150mm, 300mm, 400mm (aluminium or paper core) |
|
|
500mm-1500mm |
||
|
Tensile strength |
220-270 mpa |
|
|
Yield strength |
< 130 N/mm2 |
|
|
Elongation |
6-7% |
|
|
Application |
Automobile window, door seal strip |
|
|
Packing |
Wooden pallet suitablefor long distance sea transportation |
|
clickto view all
在线联系供应商
Other supplier products
 |
SJP-113 Aluminum Laminated Film | SJP-113 Aluminum Laminated Film SJP-113 SPECIAL ADVANTAGES ALUMINUM LAMINATED FILM FOR BATTERIES Our pouch cell case materials aluminum laminated ... |
 |
PP Rubber Seal Strip Bonding Automotive Weather Stripping Adhesive Coated Strip | PP Rubber Seal Strip Bonding Automotive Weather Stripping Adhesive Coated Strip PP Rubber Seal Strip Bonding Automotive Weather Stripping Adhesive ... |
 |
SJP-68 Aluminum Laminated Film | SJP-68 Aluminum Laminated Film SJP-68 SPECIAL ADVANTAGES aluminum laminate filmmodel can increase specific thin battery energy. SPECIFICATIONS... |
 |
40-120-40 aluminum foil STABI pipe reinforced with aluminum foil | 40-120-40 aluminum foil STABI pipereinforced with aluminum foil The Stabi PP-R pipes are manufactured from polypropylene random (PP-R) material and... |
 |
FFP1,FFP2,FFP3 Melt Blown 100% Polypropylene Nonwoven Fabric | FFP1,FFP2,FFP3 Melt Blown 100% Polypropylene Nonwoven Fabric Special Advantages Meltblown Fabric For Face MaskIntroduction Good Manufacturing Line ... |
Same products
 |
锂离子电池正极铝箔 1235 / 1060 / 1070 H18 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 锂离子电池正极铝箔是电池制造中不可或缺的集流体材料。它主要用于承载正极活性物质，并将电化学反应产生的电流高效传导至外部电路。对于动力电池、储能电池及消费电子电池而言，铝箔的厚度精度、表面质量、导... |
 |
8011 H24 Aluminum Foil 用于食品容器材料的 8011 H24 铝箔大卷Jumbo Rolls for Food Container Materials | 卖方: Henan Hongchang Aluminum Co., Ltd. | 8011 H24 铝箔大卷广泛用作制造食品铝箔容器、一次性餐盒、航空餐盘、烤盘、烧烤盘、外卖包装盒及其他食品包装容器的原材料。 该产品采用 8011 铝合金制造，经熔铸、热轧、冷轧、退火、精整及... |
 |
1050, 1060, 1100, 3003 Food-Grade Aluminum Circles for Kitchenware | 卖方: Henan Hongchang Aluminum Co., Ltd. | 在现代厨具与炊具制造业中，基材的选择直接决定了成品的成型质量、导热性能及使用寿命。食品级铝圆片（涵盖1050、1060、1100纯铝牌号及3003铝锰合金）已成为全球不粘锅、压力锅、煎锅、水壶及... |
 |
8011 H22 Aluminum Foil for Aluminum Food Trays, Baking Pans, Takeaway Containers, and Disposable Food Packaging | 卖方: Henan Hongchang Aluminum Co., Ltd. | 8011铝箔属于8xxx系铝合金，其主要合金元素为铁（Fe）和硅（Si）。与纯铝箔相比，8011合金在保持优异延展性和深冲性能的同时，具备更高的机械强度。 H22状态表明该铝箔经过了加工硬化和... |
 |
3003 / 8011 H22/H24 涂油厨房用铝箔，厚度 90 微米 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 在现代厨具制造及一次性烘焙耗材市场中，对高品质厨房铝箔的需求正从单纯的“包裹”功能向多功能特性转变。为顺应这一趋势，我们推出了采用3003-O及8011-H22/H24合... |
