Polymer Coated Aluminum Tape For Cable Armouring
Polymer Coated Aluminum Tape For Cable Armouring
As a professional aluminum composite material manufacturer in China, ouraluminum tapehas several advantages for our customers:
- plastic coated aluminum tape for cablehas a surface coating: polyester one or both side anda thickness of 0.2mm or 0.15mm for your choice.
PROPERTITIES:
EL(E)-S plastic cold metal consist of an aluminum tape coated on one or both sides with an adherent ethylene copolymer either clear or color-coded blue.
The copolymer exhibits excellent adhesion to the aluminum substrate and has the chemical resistance and general characteristic of low-density and high-density polyethylene.
The aluminum is electrical grade and purity, which has high conductivity and fabrication characteristic.
The coating line, specialized in film coating.
The slitting line ofcopolymer coated aluminum tape, desined for slitting of narrouw and thin coils in soft conditions, ensures:
No sticky windings and no staining;
Less manipulation after sltting, less risk for damage and contamination;
Uniform tension throughout the whole cil via most accurate control systems;
Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.
PACKAGE CONDITIONS
Packing details:
Normally, for aluminum strips, 20MT can be loaded into 20 foot container,we suggest to use20 foot container,the sea freight rate is much cheaper than 40 foot container.
the packing is very strong, which has 3 lays, thick fiber, foam, plastic,enough drying agent, suitable for long distance sea transportation.
We use wooden pallet and steel pallet according to customer request.
Wooden boxes will be used in the outside packing.
We have fixing in the container to avoid any damage during the transportation.
|
Polymer Coated Aluminum Tape For Cable Armouring Specifications |
|||||
|
Item |
Unit |
Values |
|||
|
1 |
Appearance |
-- |
Straight, smooth, plain |
||
|
2 |
size |
length |
m |
1000~4100 |
|
|
width |
mm |
12~1000 |
|||
|
3 |
thickness |
Aluminum base |
mm |
||
|
film |
Side A |
mm |
|||
|
Side B |
|||||
|
tape |
mm |
||||
|
4 |
Tensile strength of tape |
mpa |
70~120 |
||
|
5 |
Elongation at break |
% |
15~30 |
||
|
6 |
Bond strength between aluminum tape and coating |
Side A |
N/cm |
≥6.13 |
|
|
Sied B |
|||||
|
7 |
Bond strength of heat seal of tape |
N/cm |
≥17.5 |
||
|
8 |
Cutting strength of heat seal of tape |
-- |
Before breakdown happens to coated aluminum tape or damage happens between film and aluminum, damage never happen to the heat seal area. |
||
|
9 |
Bond strength of tape after putting into water, 68±1 centigrade,168h |
Side A |
N/cm |
≥6.13 |
|
|
Side B |
|||||
|
10 |
Jelly resistance,68±1 centigrade,168h |
Umbrella brand |
-- |
No bulb, no separation |
|
|
WT-103 |
|||||
|
11 |
Dielectric strength, DC 2KV,1min |
-- |
Without breakdown |
||
|
12 |
Corrosion resistance,0.1mol/L,NaOH, 480h |
grade |
7 |
||
clickto view all
在线联系供应商
Other supplier products
 |
SJP-68 Aluminum Laminated Film | SJP-68 Aluminum Laminated Film SJP-68 SPECIAL ADVANTAGES aluminum laminate filmmodel can increase specific thin battery energy. SPECIFICATIONS... |
 |
Polypropylene Coated Aluminum Foil | Polypropylene Coated Aluminum Foil POLYPROPYLENE COATED ALUMINUM FOILFOR STABI PP-R PIPES The Stabi PP-R pipes are manufactured from polypropylene... |
|
|
Polymer Coated Aluminum Tape For Cable Armouring | Polymer Coated Aluminum Tape For Cable Armouring As a professional aluminum composite material manufacturer in China, ouraluminum tapehas several a... |
 |
v | KF80,KF94,KF99 Melt Blown PolypropyleneSpecial Advantages Meltblown Fabric For Face MaskIntroduction Good Manufacturing Line We can provide differe... |
 |
FFP1,FFP2,FFP3 Melt Blown 100% Polypropylene Nonwoven Fabric | FFP1,FFP2,FFP3 Melt Blown 100% Polypropylene Nonwoven Fabric Special Advantages Meltblown Fabric For Face MaskIntroduction Good Manufacturing Line ... |
Same products
 |
锂离子电池正极铝箔 1235 / 1060 / 1070 H18 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 锂离子电池正极铝箔是电池制造中不可或缺的集流体材料。它主要用于承载正极活性物质，并将电化学反应产生的电流高效传导至外部电路。对于动力电池、储能电池及消费电子电池而言，铝箔的厚度精度、表面质量、导... |
 |
8011 H24 Aluminum Foil 用于食品容器材料的 8011 H24 铝箔大卷Jumbo Rolls for Food Container Materials | 卖方: Henan Hongchang Aluminum Co., Ltd. | 8011 H24 铝箔大卷广泛用作制造食品铝箔容器、一次性餐盒、航空餐盘、烤盘、烧烤盘、外卖包装盒及其他食品包装容器的原材料。 该产品采用 8011 铝合金制造，经熔铸、热轧、冷轧、退火、精整及... |
 |
1050, 1060, 1100, 3003 Food-Grade Aluminum Circles for Kitchenware | 卖方: Henan Hongchang Aluminum Co., Ltd. | 在现代厨具与炊具制造业中，基材的选择直接决定了成品的成型质量、导热性能及使用寿命。食品级铝圆片（涵盖1050、1060、1100纯铝牌号及3003铝锰合金）已成为全球不粘锅、压力锅、煎锅、水壶及... |
 |
8011 H22 Aluminum Foil for Aluminum Food Trays, Baking Pans, Takeaway Containers, and Disposable Food Packaging | 卖方: Henan Hongchang Aluminum Co., Ltd. | 8011铝箔属于8xxx系铝合金，其主要合金元素为铁（Fe）和硅（Si）。与纯铝箔相比，8011合金在保持优异延展性和深冲性能的同时，具备更高的机械强度。 H22状态表明该铝箔经过了加工硬化和... |
 |
3003 / 8011 H22/H24 涂油厨房用铝箔，厚度 90 微米 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 在现代厨具制造及一次性烘焙耗材市场中，对高品质厨房铝箔的需求正从单纯的“包裹”功能向多功能特性转变。为顺应这一趋势，我们推出了采用3003-O及8011-H22/H24合... |
