Steering Transmission Shaft Assembly Torsion Gap Tester
According to the automotive industry standard, the test bench can achieve the steering column of the steering gap, axial clearance, radial clearance, spline sliding force, cross-axis steering gap detection and trolley gap. The test bench is a special test equipment for testing the steering pitch, axial clearance, radial clearance, spline slip force and cross shaft rotation clearance of the steering column of the vehicle. The gap of the steering column assembly can be quantitatively analyzed by the tester. During the test, the computer draws the corresponding angle - torque, axial force - axial displacement, radial force - radial displacement, spline slip force - displacement performance curve. It can be used to measure starting torque, no load torque, pushing force and displacement measurement Etc., and judge the test results for product qualification or not.
Projects
●Steering gap (including starting torque meter no-load torque)
●Steering axial clearance
●Steering shaft radial clearance
●Sliding spline sliding force
●The universal joint cross shaft turns to the gap
●Universal Joint Cross Axial Clearance (measured displacement of the universal joint fork shaft) Displacement of the shaft The amount of displacement
●Drive shaft radial clearance (radial side)
●Conductive test of steering column
●Assembly endurance test
●Universal joint fork assembly torque (no-load natural state measured fork between the torque)
●Steering shaft assembly No load to start torque (steering column natural state measured its starting torque)
Technical Parameters
| Items |
Parameters |
| Maximum torque |
5Nm, accuracy: ± 0.5% F.S |
| Maximum angle |
0-360, accuracy: ± 0.5% F.S |
| Maximum input power |
200N, accuracy: ± 0.5% F.S |
| Maximum displacement |
30mm, accuracy: ± 0.5% F.S |
| Test piece length |
0.5-1.5m |
| Control mode |
Torque, angle, force, displacement |
Other supplier products
|
|
Dry Cleaning And Washing Cylinder |
Dry Cleaning And Washing Cylinder
Testing Standards:
AATCC 162, 16 CFR Part 1610
Applications:
Dry Cleaning and Washing Cylinder is designed fo... |
|
|
Bally Type Flexometer |
Bally Type Flexometer 6-12-24 Working Places
Standards:
EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351, UNE/I.U.P.20
Applications：
... |
|
|
Fast thermal conductivity tester |
Fast thermal conductivity tester-Mainly used for the determination of non-metallic solid material thermal conductivity, suitable for testing unit... |
|
|
Universal Abrasion Resistance Tester |
Introduction·The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close andfleec... |
|
|
wyzenbeek oscillatory abrasion tester |
StandardASTM D4157：Standard Test Method for Wear Resistance of Textiles (Swing Roller Method)
Applications
Oscillator Abrasion Tester is also nam... |
供应产品
Same products
