Fully Automatic Operation Fiber Optic Fusion Splicer
INFORMATION
Features
*Small size and light weight
*7s splicing and26sheating
*4 motors accuratealignment technology
*Automatic & real-time ARC calibration
*250 cycles splicing & heating once charged
*Inductive heater, not heating without fiber
*Apply to bare fiber, pigtail, drop cable etc.
*Specially design for FTTH/FTTx projects
Specifications
Applicable fiber |
SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) |
Fiber count |
Single |
Applicable fiber dimensions |
Cladding diameter: 80 -150μm, Coating diameter: 160 – 900μm |
Typical splice loss |
|
Return loss |
>60db |
Fiber cleaved length |
10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm ) |
Splicing program |
40 groups |
Operate mode |
Manual, Automatic |
Auto-heating |
Available |
Typical splicing time |
7seconds |
Typicalheating time |
26seconds |
Fiber view magnification |
250X(X or Y view), 125X(X and Y view) |
Viewing method and display |
2 CMOS cameras, 4.3 inch color LCD monitor |
Storage of splice result |
4000 results |
Loss evaluation |
Available |
Tension test |
|
Interface |
GUI menu interface, easier operation |
Battery capacity |
5200mAh, typical 250 cycles(splice and tube heat), pluggable inner Li-battery |
Power supply |
Adaptor, input: AC100-240V(50/60HZ), output: DC13.5V |
Electrode life |
More than 4000 ARC discharges, can be replaced conveniently |
Terminals |
USB 2.0 port, for uploading splice results and upgrading software |
Operating condition |
Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s |
Dimension |
149mm(L)x120mm(W)x127mm(H) |
Weight |
9kg including battery |
在线联系供应商
Other supplier products
New Version Cost Effective 8Ports GPON OLT | BAUDCOM 8PONGPONOLT productsare1U height19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high ... | |
1GE+WIFI GPON ONU | INFORMATION Brief Views BD-ONT-111W series is BAUDCOM’s for broadband access market based on the introduction of GPON technology passive opti... | |
Fully Automatic Operation Fiber Optic Fusion Splicer | INFORMATION Features *Small size and light weight *7s splicing and26sheating *4 motors accuratealignment technology *Automatic & real-time ARC ... | |
32 ports high power optical amplifier EDFA | NFORMATION Features High output power, E-Y co-doped Warm backup, on-line standby, auto redundancy Support ITU channels banding Low optical input ... | |
Highest Level Optical Fiber Fusion Splicer with Six motors | INFORMATION Product Overview BD-FS-81 Optical Fiber Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protecti... |
Same products
Self-adhesive stickers | 卖方: Shenzhen Huaxinmei Printing Co., Ltd. | ||
浇筑修复巴氏合金轴瓦轴套锡基合金轴瓦轴套 | 卖方: 河南桦创金属材料贸易有限公司 | 浇铸巴氏合金轴瓦 锡基合金挂瓦 修复轴瓦 巴氏合金是浇铸滑动轴承(轴瓦)轴衬,轴套的易熔合金通常又叫作钨金.白合金。它主要有锡基和铅基两种,所以又分别把它叫作锡基轴承合金(锡基巴氏合金)和铅基轴... | |
电梯钢丝绳铅基合金铅基巴氏合金耐磨锡基合金 | 卖方: 河南桦创金属材料贸易有限公司 | 电梯钢丝绳铅基合金铅基巴氏合金抗压锡基巴氏合金 铅是化学元素,其化学符号是Pb(拉丁语Plumbum),原子序数为82。铅是柔软、延展性强的弱金属,有毒,也是重金属。铅的本色为青白色,在空气中表... | |
各种型号机床巴氏合金轴瓦滑块 | 卖方: 河南桦创金属材料贸易有限公司 | 各种型号机床巴氏合金轴瓦滑块 巴氏合金轴瓦托瓦滑块,巴氏合金的工艺包括很多,但基本的就是底瓦的准备,1、底瓦表面镀锡打底,底瓦表面镀底锡是为了使巴氏合金与底瓦接合更牢固、紧密。因为巴氏合金中的锡... | |
巴氏合金推力瓦的作用和特点 | 卖方: 河南桦创金属材料贸易有限公司 | 巴氏合金推力瓦的结构怎样,有什么特点? 巴氏合金推力瓦的顶视为扇形,一般在60~120mm厚的钢质瓦坯表面加I出纵横鸽尾槽或方槽,然后浇铸钨金。 ACPM-2308-TR1用钨金作瓦面的优点是:... |