Leather flexural tester
Standards
- EN ISO 20344:6.6: Safety footwear leather flexing resistance.
- I.U.P.10+20/I.U.P.20: International Union of Leather Technologists protocols for crease crack analysis.
- UNI 4818: Italian standard for leather flex endurance.
- DIN 53.351: German industrial standard for material bending fatigue.
- UNE/I.U.P.20: Spanish national standard for protective footwear upper testing.
Product Advantages
- Multi-Station Efficiency: 12-station configuration enables parallel testing of leather samples, reducing batch evaluation time by up to 75%.
- Automated Operation: Pre-programmed cycle counter with auto-stop function eliminates continuous monitoring, enhancing lab productivity.
- Temperature Control: Optional low-temperature variants (-20°C to ambient) simulate extreme climatic conditions for protective footwear testing.
- Ergonomic Design: Bench-mounted unit with tool-free sample clamping and intuitive control panel for rapid setup.
- Global Compliance: Meets critical standards for automotive interiors, safety footwear, and luxury leather goods.
- Surface Finish Analysis: Detects micro-cracks and coating delamination in creased areas, critical for assessing wear in dress shoes and bags.
Product Features
- Flexing Mechanism: Rotary bending arm applies 180° reciprocal motion to leather samples at 100 ±5 cycles/min.
- Sample Mounting: 12 independent clamps with adjustable tension screws accommodate leather strips (70×45 mm) and finished footwear uppers.
- Digital Control System:
- Programmable cycles (1–999,999) with pause/resume functionality.
- Real-time cycle counter and failure alerts (e.g., stitch breakage, coating cracks).
- Temperature Regulation:
- Ambient to -20°C operation (low-temp models) with digital thermostat.
- Insulated chamber minimizes condensation during cold testing.
- Safety Features: Emergency stop button, over-cycle protection, and non-slip bench mount.
Technical Parameters
| Parameter | Specification |
|---|---|
| Work Stations | 6 or 12 (user-selectable) |
| Flexing Angle | 180° (reciprocal motion) |
| Cycle Speed | 100 ±5 cycles/min |
| Temperature Range | Ambient to -20°C (low-temp models) |
| Sample Dimensions | 70 × 45 mm (standard) |
| Power Supply | 220V/50Hz, 500W |
| Dimensions | 800 (W) × 600 (D) × 400 (H) mm |
| Net Weight | 65 kg (12-station model) |
| Data Output | USB port for cycle logs and failure timestamps |
在线联系供应商
Other supplier products
 |
Water Vapour Permeability Tester | Information The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requ... |
 |
Film punching machine | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table s... |
 |
Automotive wire cyclic bending testing machine | StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –... |
 |
Fuel Tank Comprehensive Testing Platform | Scope of application: Automotive plastic fuel tank test bench/Automotive fuel tank performance durability test bench is mainly used to detect the ... |
 |
Children's Product Comprehensive Force Tester | Applicable Standards GB/T 31701 - 2015. GB/T 6675 - 2003. GB/T 32599. EN71 - 1. BS 7909. ASTM F963. 16CFR1500.51. GB/T 22704. etc. Application Sc... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
