4-station Leather Rubbing Color Fastness Tester
Applicable Standards
The tester adheres to global colorfastness and material testing protocols, including:
ISO 11640(Leather – Color fastness to rubbing)
SATRA TM170(Standard method for color fastness to rubbing)
AATCC 8(Colorfastness to Crocking: AATCC Crockmeter Method)
ISO 105-X12(Textiles – Color fastness to rubbing)
GB/T 3920(China’s national standard for color fastness to rubbing)
These standards ensure consistent evaluation of color transfer, dye adhesion, and surface durability.
Working Principle
The tester operates viacontrolled mechanical abrasion:
Sample Mounting: Leather or fabric specimens are clamped into 4 individual stations.
Friction Head Application: A weighted abrading cloth (9 N load) moves back and forth across the sample surface.
Cycle Execution: The machine completes 50–100 cycles (customizable) to simulate wear.
Color Assessment: Post-test, the abrading cloth is evaluated for dye transfer using agray scale (AATCC EP1. ISO 105-A03)or spectrophotometer.
Test Principle & Applications
Color Fastness Evaluation (ISO 11640/AATCC 8):
The abrading cloth is rated on a 1–5 gray scale (1 = severe staining, 5 = no transfer).
Pass/fail criteria depend on industry standards (e.g., ≥4 for automotive upholstery).
Key Industries
Leather Goods: Validating color retention in handbags, shoes, and furniture.
Automotive: Testing seat covers, steering wheels, and interior trims.
Apparel: Assessing dye stability in jackets, gloves, and accessories.
The 4-Station Leather Friction Color Fastness Tester streamlines quality control, enabling manufacturers to optimize formulations, reduce rejections, and meet regulatory compliance efficiently. Its multi-sample capability and adherence to global standards make it a cornerstone of material testing laboratories.
Main Parameters
| Parameter | Specification |
|---|---|
| Number of Stations | 4 (simultaneous testing of 4 samples) |
| Friction Head Load | 9 N (standard; adjustable 5–15 N for custom tests) |
| Stroke Length | 100 mm (adjustable) |
| Friction Speed | 60 ± 2 cycles/min (1 cycle = 1 double stroke) |
| Sample Dimensions | 140 × 50 mm (standard leather/textile swatches) |
| Abrading Fabric | Standardized cotton cloth (e.g., Crockmeter cloth per ISO 105-F10) |
| Power Supply | 220V/50Hz, 60W |
| Dimensions |
500 × 350 × 300 mm (L × W × H) |
在线联系供应商
Other supplier products
 |
Leather Rubbing Colorfastness Tester | StandardsISO 11640Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing.SATRA PM 173Reference standard of footwea... |
 |
Wire Cut - through Tester for Ford Automotive Wires-QINSUN | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
Hexapod Tumbler test machine-QINSUN | Standard BSEN 1471:1997: Evaluation of Appearance Changes in Floor Coverings ISO 9405:2001: Floor Coverings – Determination of Appearance C... |
 |
Midsole Fibreboard Bending Test Machine | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, m... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
