Automotive Wire Scratch Resistance Tester
Standards
The tester adheres to global standards for material abrasion testing, including:
ISO 6722-1(Road vehicles – Electrical cables – Test methods for abrasion resistance)
SAE J2394(Standard test for electrical resistance of automotive wire insulation under abrasion)
LV 112(Volkswagen standard for automotive cable durability)
GB/T 5023(China’s national standard for electric cables – Abrasion tests)
UL 758(Appliance Wiring Material standard for insulation integrity)
These standards ensure consistent evaluation of wire insulation durability, coating adhesion, and resistance to mechanical wear.
Working Principle
The tester operates bycontrolled mechanical abrasion:
Sample Mounting: Automotive wires or cables are clamped between two moving jaws.
Abrasion Cycle: A weighted abrasive head (e.g., tungsten carbide) moves back and forth across the wire surface at a preset load (e.g., 20 N) and speed (e.g., 30 cycles/min).
Cycle Execution: The test runs until insulation breach or a predefined cycle count (e.g., 10.000 cycles) is reached.
Performance Assessment: Post-test, samples are evaluated for insulation damage, conductor exposure, or coating wear using microscopy or electrical continuity tests.
Test Principle & Applications
Abrasion Resistance Testing (ISO 6722-1/SAE J2394):
Wires are subjected to 5.000–20.000 cycles to simulate years of vibration and friction.
Pass/fail criteria: No conductor exposure or insulation breach (e.g., <0.1 mm wear depth).
Key Industries
Automotive: Validating engine bay wiring, door harnesses, and battery cables.
Aerospace: Testing in-flight entertainment system cables.
Consumer Electronics: Assessing USB-C and HDMI cable durability.
The Automotive Wire Scratch Resistance Testing Machine is essential for manufacturers developing robust wiring systems, ensuring compliance with safety standards and minimizing field failures. Its precision and adaptability make it a cornerstone of automotive component testing laboratories.
Main Parameters
| Parameter | Specification |
|---|---|
| Load Range | 1–50 N (adjustable for light to heavy abrasion) |
| Abrasion Head | Tungsten carbide tip (1 mm diameter) or steel wool (customizable) |
| Stroke Length | 10–100 mm (programmable) |
| Test Speed | 10–60 cycles/min (adjustable) |
| Sample Dimensions | Up to 5 meters (cable length); 1–10 mm diameter |
| Control System | PLC-based with 7-inch touchscreen (multilingual interface) |
| Power Supply | 220V/50Hz, 200W |
| Dimensions | 600 × 450 × 1200 mm (L × W × H) |
在线联系供应商
Other supplier products
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The e... |
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Seat Belt Abrasion Tester-QINSUN | Standard： ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety B... |
 |
IBC cleaning systems,ibc cleaning equipment,high pressure ibc washer | Model Semi-automatic IBC tote washer Spray angle 360° Material stainless steel Max. Pressure 150 bar Voltage 380V (or on request) Voltage of IB... |
 |
Martindale Abrasion Tester for Fabric & Textile Durability | Standard ASTM D4966(Standard Test Method for Abrasion Resistance of Textile Fabrics) ISO 12947-1/2/3/4(Textiles - Determination of the Abrasion R... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
