Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ?
Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ?
If we don't roughten repair strip , could it be bonded to the damage of conveyor belt?
Almost all people who use repair strip at the first time have this consideration.
To answer this problem , we need to know the function of CN bonding layer firstly.
Image 1, Ramimtech CN bonding layer repair strip .
Ramimtech repair strip with CN bonding layer, such as the image showed, take off protection film,the blue layer is
CN bonding layer , it will be bonded to the damage of conveyor belt. Brush one coat cold vulcanizing adhesive SK811 on it ,
vulcanizing reaction will generate between Cn bonding layer and conveyor belt damage area, they will be bonded together,
and bonding strength will be improved.
Image2,Ramimtech conveyor beltrepair strip with Cn bonding layer and cold vulcanizing adhesive SK811,
After knowing the function of Cn bonding layer , we get that repair stirp with Cn bonding layer need not to be roughened.
The way of which bonding repair strip (with Cn bonding layer) together with cold vulcanizing adhesive is not only easy to
operate,but also time saving . Conveyor belt can be back to run after repair. Cut downtime greatly.
When use repair strip with CN bonding layer , we only need brush one coat cold vulcanizing adhesive on the CN bonding layer .
and brush two coats on roughened damage area. when the adhesive is slight sticky, bonding them together .
As for traditional repair, though it can bond damage area, repair strip need to be brushed two coats,which will cost long time till the adhesive is sticky and can be bonded.
and the repaired area have large probability to be peeled off or be scratched by scraper.
so we get that repair strip with Cn bonding layer will enhance the bonding strength and it is time saving. and with special fabric reinfoced layer , it will increase wearing coefficient and to prevent repaired area from the secondary damage.
在线联系供应商
Other supplier products
 |
what is good brand of pulley lagging glue? | what is good brand of pulley lagging glue? As we known, we need coat one layer rubber sheet on drive drum to improve the running of conveyor system... |
 |
The differences between Ramimtech rubber sheet and other rubber sheet | The differences between Ramimtech rubber sheet and other rubber sheet During pulley lagging on roller surface, If rubber sheet falls off, the loss ... |
 |
Ramimtech repair strip | what kind of glue we should use when bond metal drum with rubber? when we do pulley lagging , we need bond metal surface of pulley with rubber shee... |
 |
RAMIMTECH wear-resisting rubber sheet | RAMIMTECH wear-resisting rubber sheet RAMIMTECH wear-resisting rubber sheet is used for lagging for conveyor belt drive drum , vibrator feeder, chu... |
 |
what is the function of conveyor belt repair strip? | what is the function of conveyor beltrepair strip? Conveyor belt surface would be partly damaged by ore or other hard objects after long time runni... |
Same products
 |
Cork Foam Roller | 卖方: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Item No. PSFR619 Size: Dia10x30cm;Dia10x45cm;Dia13x33cm Mater... |
 |
Aluminum Extrusion 6063 scrap | 卖方: Willies De Scrap Inc | Are you looking for aluminum extrusion 6063 or any other type of scraps and then you are welcome ... |
 |
RUBBER ROLLER | 卖方: THAKORJI TECHNOMECH | Rubber Roller Silicon Roller PU Rubber Roller Aluminium Roller- |
 |
RUBBER ROLLER | 卖方: THAKORJI TECHNOMECH | |
 |
RUBBER ROLLER | 卖方: THAKORJI TECHNOMECH |
