Inside Tire Release Agent
Description:Inside tire paint agent is tire inside release agent of inorganic fillers.It is applied into the inside of the uncured tire. The product gives a very good slip of the bladder into the green tire and a very good release effect after the cure. Due to its white color it is easy to detect and the spray pattern easy to control. Furthermore it shows very good air bleed and prevents the bladder from sticking to the inner liner. The inside of the tire is clean and smooth after the cure.Short drying time and low consumption makes Inside tire paint agent very economical to use.Application fields:Tire industryUasge:Inside tire paint agent need not be diluted.The product is sprayed,Website:, preferably using air atomizing systems onto the inside of the green tire. The product has virtually no tendency towards sedimentation.However,gentle stirring is recommended.Before the cure it is necessary for short drying time.Technical Index:Composition: aqueous suspension of inorganic fillers and high molecular polymerAppearance: grey-black aqueous suspensionPH:7-9Solids content: approx. 40-50 %Package：50kgs/ bag,plastic drum.Safety and Transport:Inside tire paint agent is not classified as a dangerous good according to transport legislation. So we should transport it in term of undangerous good.It has not any hurt if you use it in right way.Storage:Inside tire paint agent should be stored in tightly sealed containers and has to be protected from frost, heat and direct sunlight. If these rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot number on the labels of each container.Further information：Product technical information and data is based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability prior to use in production.
Other supplier products
|
|
|
Product SpecificationZBEC(ZBDC)-80Pre-dispersed Polymer Bound ChemicalsFunctionVulcanizing AgentProduct DescriptionCompositionA homegeneous mixture... |
|
|
|
Product Features: powder film release agent to prevent the uncured and the mix between film adhesion during storage. Powdered release agent film is... |
|
|
|
Product SpecificationMgCO3-50Pre-dispersed Polymer Bound ChemicalsFunctionFilling Agent for EVA ProductsProduct DescriptionCompositionMixture of 50... |
|
|
|
SpecficationE(E/C)-80Pre-Dispersed Polymer Bound ChemicalsfunctionVulcanizing agentDiscriptioncompositionMixture of 80% N - phenyl - N - (trichloro... |
|
|
|
Description：This product is a semipermanent inside tire release agent,Website: contains active silisa polymer;this product acts as an interface lub... |
供应产品
Same products
