.

Casting A360 automotive parts with shot blasting

Product Specifications /Features :
Feedstock– Injection molding – De-binding – Sintering –Finished parts

MIM is a advanced metalforming technology for the following requirement:
1. small part with complex shapes
2. high density
3. precision tolerance
4. high performance of tensile strength, elongation, hardness
5. low cost : minimal secondary machining cost

Advantage:
1. First Article Inspection report
2. Only qualified parts would be packed & shipped
3. Inspection reports are kept for one year at least
4. Cost improvement review is done every year

Why Choose BRM

1. Over 20 years experience of metal injection molding
2. Certification of IATF16949, ISO9001, SGS, RoHS etc.
3. 5000m² factory area with Daily output over 2000000pcs
4.One-stop serive of Designing, Manufacturing and Finishing
5. Tooling 25 days, Sampling15 days.

BRM metal injection molding specializes in Powder Metallurgy for all industries with more than 20 years. We have helped thousand of our customers with one-stop service from Designing, Manufacturing &Finishing by use of different metalworking process like
Metal injection molding
PM (press sintered)
Precision casting
CNC &Machining

Certification IAFT16949, SGS, RoHS, ISO9001, ISO14001 and ISO18001. Also inspection report before delivery will be forwarded to control the quality.

Applicable materials we can do include stainless steel, low alloy steel, tool steel, tungsten alloy, soft magnetic alloy and so on. Our mim products can apply in many fileds especially Military, Automotive, 3C consumer electronics, Medical, Tools and Machinery.




在线联系供应商

至: 上海秉瑞金属材料有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

MIM Sintered Bike Light Components
MIM Sintered Bike Light Components Product Specifications /Features : Feedstock– Injection molding – De-binding – Sintering –Finished parts MIM is a advanced...
Metal Injection Molding SUS 304 Laptop Hinge
Metal Injection Molding SUS 304 Laptop Hinge Product Specifications /Features : Feedstock– Injection molding – De-binding – Sintering –Finished parts MIM is a advance...
CNC machining precision steel parts
CNC machining precision steel parts BRM metal injection molding specializes in Powder Metallurgy for all industries with more than 20 years. We have helped thousand of our customers w...
Cold heading and Machining 11MnCold heading and Machining 11MnPb30 valve for automotive partsPb30 valve for automotive parts
Cold heading and Machining 11MnCold heading and Machining 11MnPb30 valve for automotive partsPb30 valve for automotive parts Product Specifications /Features : Feedstock– Injection molding – De-binding – Sintering –Finished parts MIM is a advanced...
Precision Spur Gear Metal Injection Molding
Precision Spur Gear Metal Injection Molding Product Specifications /Features : Feedstock– Injection molding – De-binding – Sintering –Finished parts MIM is a advance...
供应产品

Same products

Y42系列螺旋给料机
Y42系列螺旋给料机 卖方: 青岛三铸机设备制造有限公司 本机主要适用于输送粘土、煤粉、水泥等易流动、粘性小、磨损轻微、不易破碎等松散的粉料,它有结构简单、使用可靠、密封性好等特点,若用时间继电器控制给料,可以达到均匀地定量给料。
JFC系列机械回转反吹布袋除尘器
JFC系列机械回转反吹布袋除尘器 卖方: 青岛三铸机设备制造有限公司 本除尘器采用圆形体结构受力均匀,抗爆性能好,结构紧凑,采用高压风机反吹清灰,不受气源条件限制,利用阻力自动控制反吹清灰节约能源延长布袋使用寿命,严寒地区室内安装其他地区都能在室外安装,可广泛用于...
CNC machining
CNC machining 卖方: 上海秉瑞金属材料有限公司 BRM metal injection molding specializes in Powder Metallurgy for all industries with more than 20...
Casting A360 automotive parts with shot blasting
Casting A360 automotive parts with shot blasting 卖方: 上海秉瑞金属材料有限公司 Product Specifications /Features : Feedstock– Injection molding – De-binding – ...
Cold heading and Machining 11MnCold heading and Machining 11MnPb30 valve for automotive partsPb30 valve for automotive parts
Cold heading and Machining 11MnCold heading and Machining 11MnPb30 valve for automotive partsPb30 valve for automotive parts 卖方: 上海秉瑞金属材料有限公司 Product Specifications /Features : Feedstock– Injection molding – De-binding – ...