Tin Base Mold Making Silicone
Description of Tin Base Mold Making Silicone
RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which can cure at room temperature to flexible, high tear-strength rubbers. Tin cured silicone can be poured onto models or they can be made brushed by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance (Max 200℃) is required.
Characteristics of Tin Base Mold Making Silicone
Tin cure silicone rubber for molding is white or translucent flowing liquid with general hardness of 15-60shore A after curing. Molding silicone rubber is a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation, Stripping the gender is good, Linear shrinkage rate low, Size stability is good.
Applications of Tin Base Mold Making Silicone
Tin cured silicone can be used for casting polyurethane, epoxy, polyester resin, PU resin, cement, plaster, gypsum, candle, soap, waxes, toys crafts, poly resin crafts, Lighting, plastic toys, stationery gifts, statue, relieve furniture, furniture decorative materials, artificial stone, building decoration material, sculpture, sandstone, low melt alloys/metals, urethane and so on .
Data of Liquid Silicone Rubber for mould making (MSDS)
Tin condensation Rubber series
P Item NO. |
Characteristics before curing |
Curing |
||||||||
Part A |
Part B |
Part A+ Part B |
Pot life at 250C mins |
De-molding Time at 250C |
||||||
Appearance |
Ratio |
Viscosity cps |
||||||||
MCSIL-2015 |
Liquid white |
Liquid clear |
100:2 |
30-40 |
4-6 H |
|||||
MCSIL-2020 |
Liquid white |
Liquid clear |
100:2 |
30-40 |
4-6 H |
|||||
Characteristics after curing 24 hours |
||||||||||
Hardness Shore A |
Tear strength (N/mm) |
Tensile Strength |
Elongation break (%) |
Linear Shrinkage |
||||||
MCSIL-2015 |
13-15 |
25 |
≥3.8Mpa |
600 |
≤0.3% |
|||||
MCSIL-2020 |
18-20 |
25 |
≥3.8Mpa |
550 |
≤0.3% |
Note: The TDS is just for reference, we can accord customer’s requirement to adjust the color, viscosity and hardness.
Instructions for Making Silicone Molds
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 minutes under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Packing of Tin Base Mold Making Silicone
5kg/plastic drum, 25kg/plastic drum, 25kg/steel drum or 200kg/drum
在线联系供应商
Other supplier products
Skin Casting Silicone Rubber | RTV Life casting liquid silicone rubber Applications of Skin Casting Silicone Rubber Life casting silicone suitable for human skin model made, ... | |
Tin Base Mold Making Silicone | Description of Tin Base Mold Making Silicone RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which ... | |
RTV-2 Silicone Rubber for Shoe Mold Making | Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silic... | |
RTV-2 Silicone Rubber for Soap Mold Making | Description of RTV-2 Silicone Rubber for Soap Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... | |
RTV-2 Silicone Rubber for Stone Mold Making | Description of RTV-2 Silicone Rubber for Stone Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consist... |
Same products
Embossed Silicone Rubber Wristbands/Bracelets Bulk | 卖方: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... | |
SILICONE BRACELET | 卖方: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... | |
Silicone Square ICE Cube Tray | 卖方: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... | |
Silicone Sports Bottle | 卖方: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... | |
Silicone Sphere Tray | 卖方: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |