RTV-2 Silicone Rubber for Soap Mold Making

Description of RTV-2 Silicone Rubber for Soap Mold Making

RTV-2 silicone rubber is a two-component material, which consists of Part A base silicone and Part B CA30 curing agent; then the silicone base and curing agent can cure at room temperature by a condensation reaction. These silicone rubber materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc.

Applications of RTV-2 Silicone Rubber for Soap Mold Making

MCSIL-215/218 silicone rubber is suited for middle size reproduction of candle mold, soap mold, small size concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, and the products with thin flower patterns.

Detail Standard of RTV-2 Silicone Rubber for Soap Mold Making

Base and Curing Agent Mixture (100:2 by weight) in 25℃ (77℉) testing

P Item NO.	Characteristics before curing							Curing
	Part A	Part B		Part A+ Part B				Pot life at 250C mins		De-molding Time at 250C
	Appearance	Appearance		Ratio		Viscosity cps
MCSIL- 215	Liquid white	Liquid clear		100:2				30-40		4-6 H
MCSIL-218	Liquid white	Liquid clear		100:2		22000～23000		30-40		4-6 H
	Characteristics after curing 24 hours
	Hardness Shore A		Tear strength (N/mm)		Tensile Strength(Mpa)		Elongation break (%)		Linear Shrinkage
MCSIL-215	13-15		24		≥3.5		550		≤0.3%
MCSIL-218	18-20		25		≥3.8		520		≤0.3%

How to make the silicone mold?

The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

2. Mixing

Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100:2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35℃ (95℉).it’s suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.

Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3 to 5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Storage of RTV-2 Silicone Rubber for Soap Mold Making

When the silicone rubber is stored at or below 30 ℃ (85 ℉) in the original unopened containers, RTV215-218 silicone base and curing agent have a usable life of 12 months from the date of production.

Note of RTV-2 Silicone Rubber for Soap Mold Making

RTV2 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.

Packing of RTV-2 Silicone Rubber for Soap Mold Making

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum

Part B CA30 Curing Agent: 0.25kg/bottle,1kg/bottle and 10kg/bottle

Other supplier products

	RTV-2 Silicone Rubber for Candle Mold Making	Description of RTV-2 Silicone Rubber for Candle Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic...
	RTV-2 Silicone Rubber for Plaster Mold Making	Description of RTV-2 Silicone Rubber for Plaster Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber con...
	Liquid Silicone Rubber for Molding	Description RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-2...
	RTV-2 Silicone Rubber for Soap Mold Making	Description of RTV-2 Silicone Rubber for Soap Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic...
	Tin Base Mold Making Silicone	Description of Tin Base Mold Making Silicone RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which ...

供应产品

Same products

	Embossed Silicone Rubber Wristbands/Bracelets Bulk	卖方: Yppromotion	In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ...
	SILICONE BRACELET	卖方: Yppromotion	The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona...
	Silicone Square ICE Cube Tray	卖方: Shenzhen YF Technology Co.,Ltd	The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main...
	Silicone Sports Bottle	卖方: Shenzhen YF Technology Co.,Ltd	Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I...
	Silicone Sphere Tray	卖方: Shenzhen YF Technology Co.,Ltd	Environmental friendly material, food grade silicone, used for making various ice cubes, which ca...