China liquid Silicone mold making material for concrete/artificial stone casting

China liquid Silicone mold making material for concrete/artificial stone casting

Artificial Stone & Concrete Casting Silicone Rubber

C-825/C-830/C-835 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a white, Shore A25-A35 rubber. This is a pourable rubber, but it can be easily thickened with Liquid Thickener or for brush-on application.

Popular product options is C-825/C-830/C-835 are the mold material of choice for high-volume veneer stone production (manual or automated manufacturing). These two-component mold rubbers capture excellent surface detail, offer exceptional dimensional stability and have unmatched lifetime and durability compared to hot melt and polypropylene systems.

Molds made from these room temperature curing systems can be completed in a much shorter timeframe (~4 hour demold) compared to latex rubber molds. When properly maintained, these molds can last for years and produce thousands of stones.

Typical general characteristics	Inspection Method	Value
Product data (Catalyzed A+B)		C-825	C-830	C-835
Hardness	Shore A	25±2	30±2	35±2
Mix Ratio	A:B	100:3	100:3	100:3
Color	/	White	White	White
Pot life	25 °C (77F)	30-40mins	30-40mins	30-40mins
Curing time	25 °C (77F)	3-4 hours	3-4 hours	3-4 hours
Mixed viscosity		20000±1000	23000±1000	23000±1000
Tear-strength	kg/cm	22±2	23±2	23±2
Tensile-strength
Elongation	%	450±50	460±50	460±50
Shrinkage	%	≤0.3	≤0.3	≤0.3

Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

Making molds for

-cast stone veneer: artificial stone, fake stone, artificial rock, cultured stone

-Flexible Form Liners, cast decorative concrete panels, wall blocks, fencing, retaining walls and sound barriers

-Site Furnishings & Decor: decorative concrete,concrete statues, tiles, decorative panels, outdoor and indoor furniture, planters and many other decorative precast concrete products,

-precast concrete hardscape: pavers, stepping stones, patio stones, rock face liners, fire pits, retaining wall block, pier and wall caps and more,

-architectural elements,concrete brackets, decorative panels, medallions, cornice molding, balusters, columns and more

When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.

Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

Curing Agent: 30g/bottle; 1kg/bottle

Other supplier products

	Cheap price Platinum cure rtv2 silicone rubber for body parts casting	Cheap price Platinum cure rtv2 silicone rubber for body parts casting Body Casting Silicone GT-8 series life casting platinum cure, skin-safe sil...
	China supplier Rtv mould making Silicone rubber for Taxidermy Molding	China supplier Rtv mould making Silicone rubber for Taxidermy Molding Taxidermy Molding Silicone GC tin cure silicone liquid mold rubbers are use...
	Cheap price two component silicone rubber liquid for model making	Cheap price two component silicone rubber liquid for model making Model Making Silicone 1 Description GC silicone mold rubbers are widely used t...
	Where to buy silicone rubber molding material for shoe sole mould	Where to buy silicone rubber molding material for shoe sole mould Shoe Sole molding Silicone GC RTV silicone C-825 are good for shoe sole molding...
	Low price rtv-2 silicone rubber with hardener for candle soap mould making	Low price rtv-2 silicone rubber with hardener for candle soap mould making Soap & Candle Mold Making Silicone C-810/C-815/C-820 Silicone Rub...

供应产品

Same products

	Silicone Rubber Mold	卖方: Packson Mold Co.,Ltd	Silicone rubber is a kind of elastic material, which is widely used in industry and family. It ha...
	Embossed Silicone Rubber Wristbands/Bracelets Bulk	卖方: Yppromotion	In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ...
	SILICONE BRACELET	卖方: Yppromotion	The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona...
	Silicone Square ICE Cube Tray	卖方: Shenzhen YF Technology Co.,Ltd	The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main...
	Silicone Sports Bottle	卖方: Shenzhen YF Technology Co.,Ltd	Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I...