Hand Pushing Passenger Steps
WTJ3600TKT Hand-pushing passenger step1 Name: Hand-pushing passenger step2 Type：WTJ3600TKT3 ProfileThe designed height off ground for WTJ3600TKT hand-pushing passenger stair is 3600mm,Website:, which could be slightly adjusted for height tolerance between passengers stair and hatch, this type of passengers stair could be applied for A318、A319、A320、A321、B707、B727、B737、DC-8/40/50F、DC8-61/61F、DC8-62/62F、DC8-63/63F、1L-184 Product standard1）MHT 6029-2014 《Passenger step》2）CCAR-331SB-R1 《No.170 general administration of civil aviation of china》3）CCAR-140 《No.191 general administration of civil aviation of china》5 Main technical parameterNo.NameSpecification1Overall size（length ×width ×height）
（without canopy）8285×2220×35202Platform size2000×14003Height of ladder handrail11704Front overhang525Rear overhang12905Wheelbase40306WheelbaseDistance of front tire900Distance of rear tire15507Central distance of outriggersFront outriggers19908Rear outriggers19909Curb weight（without canopy）1700kg10Load capacity of front tire970kg11Load capacity of rear tire730kg12Ladder step1813Allowance speedMax. driving speed20km/hMax. driving speed3km/h14Encircle diameter for channel17000mm15Departure angle5°16Approach angle33°17Angle of inclination23°～36°18Internal width of ladder bodyLadder body130019Tailed ladder112020Ladder height（Ground clearance 2500/3600时）130/19521Mode of height adjustmentDisplacement type rhomboid22Dimension of footstep300×112023Stoke of movable sliding door85024Workable platformLift height2500mm-3600mmLoading quantity(peoples)6（≥450kg）25Specification of tire4.00-826Min. ground clearance160mm27Max. lading capacity (peoples)33（≥2500kg）28Manual pushing force≤300N6. Main structureWTJ3600TKT is made of sliding assembly, plate assembly, ladder body, lifting mechanism, platform assembly and tail ladder assembly.The designed height off ground is 2500～3600mm.Attached figure2：Figure2. Main structure6.1 Sliding doors assemblyThe structure for sliding doors adopt 38×25×1.5mm stainless steel welding and aluminum composite panel, both of sides install anti-collision rubber pipe.Attached figure 3：Figure 3.sliding door assembly6.2 Back plate assemblyIt adopt 38×25×1.5mm stainless steel welding and aluminum composite panel, both of sides install 6 pieces of LED.Attached figure 4：Figure 4.back plate assembly6.3 Ladder body assemblyFigure5.1 ladder body assembly6.4 Lifting mechanismFigure 6. Lifting mechanism6.5 Under frame assembly Figure 7.Underframe assembly6.6 Platform assemblyFigure8.platform assembly6.7 Tail ladder assemblyFigure 9.Tail ladder assembly6.8 Canopy assembly（Option）Attached figure10：Figure10. canopy assembly
Other supplier products
|
|
Hand Pushing Passenger Steps |
WTJ3600TKT Hand-pushing passenger step1 Name: Hand-pushing passenger step2 Type：WTJ3600TKT3 ProfileThe designed height off ground for WTJ3600TKT ha... |
|
|
Passenger Steps |
TY-KT58 SELF-PROPELLED PASSENGER STAIRS
1. Product profile:
TY-KT58 Passenger stairs adopt self-made... |
|
|
Passenger Boarding Stairs |
WTJ5060JKT SELF-PROPELLED PASSENGER STAIRS
Ⅰ. Products introduction
The designed height off ground for WTJ5040JKT mo... |
|
|
Manual Aircraft Steps |
WTJ5040JKT SELF-PROPELLED PASSENGER STAIRS
Ⅰ. Products introduction
The designed height off ground for WTJ5040JKT mo... |
|
|
Manual Aircraft Stairs |
WTJ5040JKTMobile Passenger Stairs OPERATING INSTRUCTIONS Jiangsu TIANYI AIRPORT SPECIAL EQUIPMENT CO.,LTD ContentⅠ. Products introdu... |
供应产品
Same products
