Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector
Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, induced over-voltage, induced over-voltage, and operation over-voltage. The RF lightning arrestoris widely applied in RF circuit protection of wireless coverage, base station, etc.
Smart antenna, SDMA
IEEE G902 wireless LAN
IEEE 802.11b and 802.11g wireless LAN
PTN, MSPT
Transport Network
Access Network, FTTX, UTRAN
Base station antenna feeder
ISM
MMDS
Cellular
PCS
GPS
2G, 3G, 4G communication
GSM, CDMA, WCDMA, TD-LTE, FDD-LTE
Features Of 1/4 Wave RF Lightning Arrestor
Wide frequency band
Large discharge current
Extremely low insertion loss and VSWR
QWS technology
Good performance from DC to 3GHz
Low strike throughput energy
Withstand multiple lightning strikes
Bi-Directional Protection
Technical Parameters Of 1/4 Wave RF Surge Arrestor
|
Model |
R27DF-1/4 |
R27NF-1/4 |
R60NF-1/4 |
R05NF-1/4 |
|
Lightning protection zone(LPZ) |
1-2 |
|||
|
Class |
||||
|
According to DIN VDE 6075 Part 6 (Draft11.89)A1, A2 |
C |
|||
|
According to IEC61643 |
II |
|||
|
Max discharge current Imax (8/20µs) Imax |
50KA |
40KA |
40KA |
30KA |
|
Working frequency |
||||
|
Protection level In Up |
≤200v |
|||
|
Insertion Loss |
≤0.1db |
|||
|
Standing-wave ratio |
≤1.15 |
|||
|
Interface form |
UHF |
N |
DIN |
BNC |
|
Working conditions |
Temperature: -40 to 80℃, Relative humidity: ≤95% |
|||
|
Standards compliance |
IEC6000, EN60950 |
|||
|
Mounting |
Be installed between protected equipment and the signal line |
|||
|
Material |
stainless steel +Copper/ silver white |
|||
|
IP code |
IP20 |
|||
|
Connector type |
DIN |
N |
N |
N |
As a spd manufacturer, we can offer kinds of spd typesfor sale, anything you need, please contact us.
在线联系供应商
Other supplier products
| HD-SDI Video Surge protector | Low insertion loss, fast response time Low limiting voltage precise limiting voltage Large discharge current High transmission rate Low... | |
| Type 1+2 /Class B+C Switch-type Gap Technology Lightning Surge Protector with TUV mark | These series products are mainly used for Type 1+Type 2 protection of power distribution systems (10/350µs) and are used to protect electrica... | |
| 2in 1 SPD for CCTV M10-24 D05J4 | 2 in 1 monitor lightning arrester(power and network), a Kind of SPD, designed for a digital camera to protect camera power, data line from lightnin... | |
| Techwin UL 1449 listed TVSS 100kA surge protection device(SPD) for AC power system | HM100F Series AC power supply SPD box is mainly applicable to three phase power distribution system to protect electrical equipment from the impact... | |
| SPD for Solar Power System/PV System | Lightning combiner box for PV array is installed between PV module and inverter. And solar power surge protectorpowersystem is widely applied in a ... |
Same products
| EML with 2 meter Vinyl Coated Steel Cable with Loop | 卖方: Ming jiang Electrical | ● Constructed from durable polypropylene material. ● Injection moulded one-set construction incl... | |
| Pin Type Circuit Breaker Lockout Safety Mini Miniature Circuit Breaker | 卖方: Ming jiang Electrical | Code:DZS01 Self-locking Design,Pin facing outward. Push-button mechanism for simple pin prong e... | |
| Carbon Steel Bridge Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... | |
| Customized Thrie-Beam Highway Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... | |
| Non Blocked MASH-TL3 Single Steel Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |


















