Snap Button Tester | Button Impact Tester
Standards:
ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).
Application:
Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.
Product Information:
With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.
Features:
1. Ensure the vertical alignment of tension;
2. Fixed button edge without affecting its adhesion;
3. Consistent force of 10s continuously;
4. Elevate and fix the position of the test meter through the handle, easy to change samples
5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;
6. Safety buckle design makes operation more secure and reliable;
7. The long machine frame can extend the test scope more widely;
8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;
9. Can reduce the damage caused by slid leakage during test process;
10. Simple design and accurate test results.
Technical Parameter
| Parameter | Specification |
|---|---|
| Operating Mode | Manual |
| Impact Head Weight | 0.84kg |
| Impact Height | 32mm, 44mm, 67mm, 83mm, 95mm, 117mm |
| Body Material | Stainless Steel / Brushed Finish |
| Instrument Weight | 5kg |
| Power Supply | No (Manual Operation) |
| Appearance Size | 100mm (L) × 150mm (W) × 300mm (H) |
在线联系供应商
Other supplier products
 |
Ejection Kinetic Energy tester / Kinetic Energy Tester | Product Introduction: Velocity measuring ejection kinetic energy tester, suitable for ejection projectiles, energy storage ejection toys, non-ener... |
 |
Carbon black content measuring machine丨Carbon Black Content Tester | Scope of application: Used to determine the carbon black content of rubber, polyolefin plastics, polyolefin pipes and fittings, and raw materials ... |
 |
DSC Differential Scanning Calorimeter / Differential Scanning Calorimeters | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
Fabric Fiber Shedding Degree Tester (Friction Method) / Fabric Shedding Test Machine | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Internal and external filters | Applicable Standards Both filter types adhere to industry-specific regulations, including: ISO 10526(Standard illuminants for colorimetry, e.... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | 卖方: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | 卖方: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | 卖方: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
