1FE +1FX Smart Media Converter
HiOSO Technology Co.,Ltd is one of the leading 1fe +1fx smart media converter manufacturers,Website:, equipped with productive factory, welcome to buy and wholesale link failure alert media converter, 1fe 100m + 1 fiber 100m smart media converter, 1rj45 100m + 1 sc 100m smart media converter products from us.
Overview
HiOSO FC830A is an intelligent 10/100M adaptive fast Ethernet fiber media converter (also called optical-to-electrical medium converter). With its unique “link failure alert” function at both optical and electrical ends, this fast Ethernet fiber converter can completely replace the fiber converter of Network Management System (NMS) type and greatly reduce system cost.
FC830A can conduct mutual conversion between 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals.
FC830A extends the transmission distance of a network from 100m over copper wires to 120 Km, and uses two network transmission technologies (that is, the data link layer 2 storing & forwarding mode and the physical layer 1 straight-through mode) to implement data transmission between the optical and electrical network connection mediums. FC830A fiber converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
10/100 Mbps adaptive, for the convenience of network upgrade;
Efficient built-in switching core, to implement flow control and reduce broadcast packets;
Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
Supporting Link Failure Alert (LFA);
Supporting FX half-duplex/full-duplex transmission modes and link failure alert function;
Supporting switch selection of 10/100Mbps storing & forwarding mode and 100Mbps straight-through transmission mode (unique);
Supporting low-delay transmission;
Supporting transmission of extra-long packets (with the maximum length of 1600 bytes);
Supporting transmission of extra-long packets over VLAN;
Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
Supporting Spanning Tree Protocol (STP) to form a redundant network;
Extremely low power consumption (less than 2W), low heat and capable of stable operation for a long period time;
Supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, to satisfy the extended requirements of users.
Application
10/100Mbps fast optical Ethernet long-distance transmission network
Technical Specifications
Parameters
Specifications
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km;single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pairs: 100m
Port
One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125 μ m)
Conversion mode
Medium conversion, storing and forwarding/straight-through
MAC address table
I K
Buffer space
1Mbit
Flow control
Full duplex state: flow control; half-duplex state: back pressure mode
Delay
Storing & forwarding: 9.6 μ s; straight-through: 0.9 μ s;
Bit error rate
<1/1000000000
MTBF
100,000 hours
LED
POWER (power), FX LINK/ACT (fiber link/action) FDX (FX full-duplex mode), TP LINK/ACT (twisted pair link/action) TP 100 (twisted pair: transmission rate of 100M); FX 100 (fiber: transmission rate of 100M) (external power)
Power
DC5V 1A (external), AC220 0.5A/DC-48 (built-in)
Power consumption
<2W
Operating temperature
-10~55°C
Operating humidity
5%~90%
Storage temperature
-40~70°C
Storage humidity
5%~90% (non-condensing)
Dimensions
26mm(H)*71mm(W)*95mm(D) (height * width * depth) (external power) 26mm(H)*85mm(W)*135mm(D) (height * width * depth) (built-in power) 110mm(H)*22mm(W)*81mm(D) /(height * width * depth) (module card)
Order Information
Model
Rate (Mbps)
Mode
Working Wavelength
(nm)
Distance
(Km)
Port
Link
Alarm
Power
FC830A-M2-SC/ST
10/100
Dual-fiber multi-mode
1310
2
SC/ST
Support
External DC5V/1A
FC830AP-M2-SC/ST
10/100
Dual-fiber multi-mode
1310
2
SC/ST
Support
Built-in
AC220V/DC-48V
FC830AC-M2-SC/ST
10/100
Dual-fiber multi-mode
1310
2
SC/ST
Support
Module card DC5V
FC830A-S20/40/60
-SC/FC
10/100
Dual-fiber single-mode
1310
25/40/60
SC/FC
Support
External DC5V/1A
FC830A-S80/100/120
-SC/FC
10/100
Dual-fiber single-mode
1550
80/100/120
SC/FC
Support
External DC5V/1A
FC830AP-S20/40/60
-SC/FC
10/100
Dual-fiber single-mode
1310
25/40/60
SC/FC
Support
Built-in AC220V/DC-48
FC830AP-
S80/100/120-SC/FC
10/100
Dual-fiber single-mode
1550
80/100/120
SC/FC
Support
Built-in AC220V/DC-48
FC830AC-S20/40/60
-SC/FC
10/100
Dual-fiber single-mode
1310
25/40/60
SC/FC
Support
Module card DC5V
FC830AC-
S80/100/120-SC/FC
10/100
Dual-fiber single-mode
1550
80/100/120
SC/FC
Support
Module card DC5V
FC830AS-S20/40/
60/80/100-SC
10/100
Single-fiber single-mode
WDM 1310/1550
25/40/
60/80/100
SC
Support
External DC5V/1A
FC830APS-S20/40/
60/80/100-SC
10/100
Single-fiber single-mode
WDM 1310/1550
25/40/
60/80/100
SC
Support
Built-in AC220V/DC-48V
FC830ACS-S20/40
/60/80/100-SC
10/100
Single-fiber single-mode
WDM 1310/1550
25/40/
60/80/100
SC
Support
Module card DC5V
Other supplier products
|
|
|
100M 16 Ports Fiber Switch,Website: Switch |
|
|
|
1GE Managed Media Converter,Website: Media Converter |
|
|
|
HiOSO Technology Co.,Ltd is one of the leading 1000m 8 ports fiber switch manufacturers,Website:, equipped with productive factory, welcome to... |
|
|
|
74 Series 4 Ports EOC Slave With WIFI,74 Series EOC |
|
|
|
16 PON OLT,Website: |
供应产品
Same products
