How to Select a Suitable Fiber Optic Jumper for an Optical Transceiver

With the rapid development of optical communication technology, optical transceiver have gradually evolved from the larger GBIC modules to SFP + optical transceiver modules that support 10G rates, QSFP + optical transceiver modules that support 40G rates, and CFP optical modules and QSFP28 optical transceivers that support 100G rates. We know that optical transceivers are usually used with optical fiber jumper. However, due to different applications, the operating wavelengths, interface types, and transmission distances of different optical transceiver are different. Therefore, the optical fiber jumpers must be different. In order to help users better understand which optical transceiver should be used with which optical jumpers,UnitekFiber will introduce the selection of optical fiber jumper typesfor optical transceiver modules.

The Fiber Optic jumper is a section of optical fiber cable which is generally 2.0mm or 3.0mm. Optical connectors are assembled at both ends of the fiber cable to realize the active connection of the optical path. Common types of connectors are LC, SC, FC, ST, MPO, MTP, etc. Optical Jumpers are used to transfer various links on the distribution frame.

One end of the fiber optical cableis equipped with a connector and the other end is an exposed optical cable is called fiber pigtail. The connector is used to connect the device, while the other end is connected to other fiber optic cable cores by fusion welding, which can minimize insertion loss. Connecting the pigtail to the distributed optical cable by mechanical or fusion welding can significantly simplify the installation and maintenance of the cable system.

How to Select a Suitable Fiber Optic Jumper for an Optical Transceiver

To select a suitable fiber jumper for an optical module, we must first understand the optical transceiver from the four aspects of the transmission medium, interface, transmission distance, and data rate, and then select the corresponding fiber jumper.

Transmission medium

There are two types of transmission media in modern telecommunication networks: optical cables and copper cables. Therefore, optical transceiver modules can be divided into optical transceiver modules for optical fiber links and electrical port modules for copper links. The multi-source agreement (MSA) specifies the standards for multiple electrical interface modules, such as 100BASE-T, 1000BASE-T, and 10GBASE-T. Therefore, these electrical interface modules have multiple types such as GBIC, SFP and SFP +. It should be noted that the electrical interface module is an RJ45, which is usually used with Cat 5/6/7 type network jumpers (as shown below).

Compared with electrical port modules, the situation of optical transcever modules is much more complicated. This is because different optical transceiver have different transmission distances and transmission rates, so there are many more types of fiber optic jumpers used with them. In general, optical fiber jumpers can be divided into two types: single-mode fiber jumpers and multi-mode fiber jumpers. Single-mode fiber jumpers are usually used for long-distance transmission, and multi-mode fiber jumpers are generally used for short-distance transmission. Among them, single-mode fiber jumpers can be further subdivided into OS1 fiber jumpers and OS2 fiber jumpers (the performance of OS2 fiber jumpers is higher than that of OS1 fiber jumpers). Multimode fiber jumpers can be further subdivided OM1 fiber jumper, OM2 fiber jumper, OM3 fiber jumper and OM4 fiber jumper.

As we all know, transmission distance and transmission rate are closely related. Generally speaking, the lower the transmission rate, the longer the transmission distance. This rule is particularly evident in multimode fiber transmission. The following table shows the transmission distance of 850 nm optical signals under different multimode fibers and different transmission rates:

Multimode Fiber type	1G	10G	40/100G
OM1	300m	36m	Not applicable
OM2	500m	86m	Not applicable
OM3	1km	300m	100m
OM4	1km	550m	150m

Transmission distance and data rateThe multi-source agreement (MSA) specifies the operating wavelength, data rate, and transmission distance of various optical transceiver modules in detail, and lists the types of optical cables suitable for them. This also has a certain reference role in the selection of fiber optic jumpers. The following table is the specific details of common optical modules:

Transceiver type	Working wavelength	Fiber cable type	Data rate	Transmission distance
SX	850nm	MM	1G	500m
LX	1310nm	SM	1G	8km
EX	1310nm	SM	1G	40km
ZX	1550nm	SM	1G	70km
SR	850nm	MM	10G	300m
LR	1310nm	SM	10G	10km
ER	1550nm	SM	10G	40km
ZR	1550nm	SM	10G	80km
SR4	850nm	MM	40G	100m
SR10	850nm	MM	100G	100m
LR4	1310nm	SM	40G	10km

Interface TypeThe interface type is an essential consideration when choosing fiber optic jumpers. The interface of common optical transceivers usually has two ports (one for receiving optical signals and one for transmitting optical signals), that is, duplex SC or duplex LC. Therefore, duplex SC / LC fiber jumpers are required. However, the newly introduced BiDi optical transceiver in recent years has only one port (both can receive and transmit optical signals), so a simplex fiber jumper is required.

With the gradual popularization of 40 / 100G equipment, there are MTP / MPO interface optical transceivers in the market, so they need to be used with MTP / MPO multi-core fiber jumpers

If you neen more information or support on fiber optical products, please don't hesitate to contact us we will try our best to support you.

As one of fiber optic products manufacturers, we will do our best to meet all the needs of customers.

Other supplier products

	AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M	Active optical cable, as a main transmission medium for high-performance computers and data centers, guarantees the stability of transportation and...
	Breakout Indoor Fiber Optic Cable	Description of fiber breakout optic cable Breakout fiber optic cable also can be called as distribution fiber optical breakout cable is designed f...
	Direct Burry Fiber Optic Cable|GYTA53 Fiber Cable 24 Core SM Aluminum Armored Double Sheathed Loose Tube	GYTA53 direct burial single mode fiber optic cableis with good waterproof, anti-side pressure and tensile properties, suitable for direct burial. ...
	Duplex Zipcord Fiber Optic Cable GJFJV 2.0mm 3.0mm Simplex SM MM Corning G657 PVC & LSZH	Duplex 2.0/3.0mm Fiber optical cable is a zipcord fibercable paralleled two 2.0/3.0mm simplex cables together. This cable is mainly used for termin...
	19 Inch 2U Rack Mount Fiber ODF Optical Distribution Frame / Patch Panel 48 Port loaded with SC duplex Adapter	Description UnitekFiber is manufacturing 2U fiber optical distribution frame. Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. ...

供应产品

Same products

	Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White	卖方: Shenzhen UnitekFiber Solution Limited	UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt...
	Introduction of Bulk Fiber Optic Cables Assembly	卖方: Shenzhen UnitekFiber Solution Limited	Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru...
	Description of breakout fiber optic cable	卖方: Shenzhen UnitekFiber Solution Limited	optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo...
	AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M	卖方: Shenzhen UnitekFiber Solution Limited	Active optical cable, as a main transmission medium for high-performance computers and data cente...
	Introduction of Anti-rodent Fiber Optic Cable	卖方: Shenzhen UnitekFiber Solution Limited	The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ...