How to Select a Suitable Fiber Optic Jumper for an Optical Transceiver

• 

With the rapid development of optical communication technology, optical transceiver have gradually evolved from the larger GBIC modules to SFP + optical transceiver modules that support 10G rates, QSFP + optical transceiver modules that support 40G rates, and CFP optical modules and QSFP28 optical transceivers that support 100G rates. We know that optical transceivers are usually used with optical fiber jumper. However, due to different applications, the operating wavelengths, interface types, and transmission distances of different optical transceiver are different. Therefore, the optical fiber jumpers must be different. In order to help users better understand which optical transceiver should be used with which optical jumpers,UnitekFiber will introduce the selection of optical fiber jumper typesfor optical transceiver modules.

The Fiber Optic jumper is a section of optical fiber cable which is generally 2.0mm or 3.0mm. Optical connectors are assembled at both ends of the fiber cable to realize the active connection of the optical path. Common types of connectors are LC, SC, FC, ST, MPO, MTP, etc. Optical Jumpers are used to transfer various links on the distribution frame.

One end of the fiber optical cableis equipped with a connector and the other end is an exposed optical cable is called fiber pigtail. The connector is used to connect the device, while the other end is connected to other fiber optic cable cores by fusion welding, which can minimize insertion loss. Connecting the pigtail to the distributed optical cable by mechanical or fusion welding can significantly simplify the installation and maintenance of the cable system.

How to Select a Suitable Fiber Optic Jumper for an Optical Transceiver

To select a suitable fiber jumper for an optical module, we must first understand the optical transceiver from the four aspects of the transmission medium, interface, transmission distance, and data rate, and then select the corresponding fiber jumper.

Transmission medium

There are two types of transmission media in modern telecommunication networks: optical cables and copper cables. Therefore, optical transceiver modules can be divided into optical transceiver modules for optical fiber links and electrical port modules for copper links. The multi-source agreement (MSA) specifies the standards for multiple electrical interface modules, such as 100BASE-T, 1000BASE-T, and 10GBASE-T. Therefore, these electrical interface modules have multiple types such as GBIC, SFP and SFP +. It should be noted that the electrical interface module is an RJ45, which is usually used with Cat 5/6/7 type network jumpers (as shown below).

Compared with electrical port modules, the situation of optical transcever modules is much more complicated. This is because different optical transceiver have different transmission distances and transmission rates, so there are many more types of fiber optic jumpers used with them. In general, optical fiber jumpers can be divided into two types: single-mode fiber jumpers and multi-mode fiber jumpers. Single-mode fiber jumpers are usually used for long-distance transmission, and multi-mode fiber jumpers are generally used for short-distance transmission. Among them, single-mode fiber jumpers can be further subdivided into OS1 fiber jumpers and OS2 fiber jumpers (the performance of OS2 fiber jumpers is higher than that of OS1 fiber jumpers). Multimode fiber jumpers can be further subdivided OM1 fiber jumper, OM2 fiber jumper, OM3 fiber jumper and OM4 fiber jumper.

As we all know, transmission distance and transmission rate are closely related. Generally speaking, the lower the transmission rate, the longer the transmission distance. This rule is particularly evident in multimode fiber transmission. The following table shows the transmission distance of 850 nm optical signals under different multimode fibers and different transmission rates:

Transmission distance and data rateThe multi-source agreement (MSA) specifies the operating wavelength, data rate, and transmission distance of various optical transceiver modules in detail, and lists the types of optical cables suitable for them. This also has a certain reference role in the selection of fiber optic jumpers. The following table is the specific details of common optical modules:

Interface TypeThe interface type is an essential consideration when choosing fiber optic jumpers. The interface of common optical transceivers usually has two ports (one for receiving optical signals and one for transmitting optical signals), that is, duplex SC or duplex LC. Therefore, duplex SC / LC fiber jumpers are required. However, the newly introduced BiDi optical transceiver in recent years has only one port (both can receive and transmit optical signals), so a simplex fiber jumper is required.

With the gradual popularization of 40 / 100G equipment, there are MTP / MPO interface optical transceivers in the market, so they need to be used with MTP / MPO multi-core fiber jumpers

If you neen more information or support on fiber optical products, please don't hesitate to contact us we will try our best to support you.

As one of fiber optic products manufacturers, we will do our best to meet all the needs of customers.

Другие товары поставщика

	LC 12 Colorful Bulk Pigtails Single Mode Multi Mode Corning Fiber	Description: UnitekFiber provides Corning 12 colorful bulk fiber pigtails. The fiber pigtail is ususally using 0.9mm fiber cable. The cable can be ...
	ADSS кабель	Introduction of ADSS Fiber Optic Cable   ADSS ofc cable is also known as All-Dielectric Self Supporting fiber optic cable. All-dielectric ADSS fibe...
	OSP Fiber Cable(Outside Plant Fiber Cable)	OSP fiber cable is outside plant fibercable, commonly used for outdoor applications. OPS fiberoptical cables are divided into two types: central tu...
	MTP MPO-LC Fiber Optic Jumper Method A Pigtail Trunk 12 to 144 Cores 3mm Single-mode G652D G657A2	Manufacturing MTP MPO fiber opticjumpers which are available in 12 to 144 core fiber connections. MTP/MPO jumers are miniaturized with 12 or 24 pi...
	Patchcord LC-FC MM Duplex 3.0mm PVC	Description: UnitekFiber provide patchcords. Pathchord means that the terminations are connect at both ends of the optical cable to realize the opt...

Похожие товары

	OTDR	Продавец: Shenzhen Puhuixin Tecnhnology Co., Ltd.	Optical time-domain reflectometer (namely,OTDR) is an instrument that understands the uniformity,...
	Otdr Tester for Sale-AOR500	Продавец: Shenzhen Puhuixin Tecnhnology Co., Ltd.	The main features of OTDR tester for saleare: Convenient one-button testing. High-speed signal pr...
	Optical Power Meter With VFL	Продавец: Shenzhen Puhuixin Tecnhnology Co., Ltd.	Fiber optic power meter with vflrefers to an optical power meter that combines the functions of a...
	Optical Power Meter	Продавец: Shenzhen Puhuixin Tecnhnology Co., Ltd.	An FTTH optical power meter(OPM) refers to an instrument used to measure absolute optical power o...
	Optical Light Source	Продавец: Shenzhen Puhuixin Tecnhnology Co., Ltd.	light source for fiber optic cablerefers to a light source whose output optical power, wavelength...