sell 13.56MHz rfid module JMY501H
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: • PCD: NXP RC500, RC531, RC632, RC400; FM1722 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm(depending on card and antenna design) • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only • Auto detecting card: Supported, default OFF • EEPROM: 512Bytes • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC--400Kbps, UART--19200bps/115200bps • Max.command length: 511 Bytes • Interface level: 3.3V (TTL level; 5V tolerance) • Power supply: DC5V • Power consumption: 70mA • Dimension: 42mm×21mm×8mm • Package: DIP32 • Weight: about 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant
在线联系供应商
Other supplier products
 |
sell 13.56MHz HF rfid reader MR761 Interface: USB (HID standard) | MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
 |
sell 13.56MHz rfid module JMY504C PCD: NXP RC522, RC523 | JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of con... |
 |
sell 13.56MHz rfid module JMY505H 50ohm coaxial cable | JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of con... |
 |
sell 13.56MHz HF rfid reader MR810 Interface: USB PC/SC | MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, I... |
 |
sell 13.56MHz rfid module JMY620C Interface: I2C, UART | JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. T... |
Same products
 |
WYLIE eSIM 转双 SIM 卡托盘专业套件，适用于 iPhone 16 Pro Max | 卖方: 深圳维客修科技有限公司 | 描述 WYLIE 专用柔性电缆可将 iPhone 16 Pro/16 Pro Max US eSIM 转换为双 SIM 功能，无需分离，也不会损坏柔性电缆。Wylie USA 版 iPhone ... |
 |
MaAnt F711 F712旋转加热分离器适用于手机屏幕拆卸 | 卖方: 深圳维客修有限公司 | 描述 MaAnt F711 F712 360°旋转加热分离器适用于手机/平板电脑7寸曲面/直屏分离、液晶边框拆卸等。MaAnt屏幕加热分离器内置强力静音吸水泵和智能温控... |
 |
JC V1SE 编程器适用于 iPhone 屏幕电池 Face ID 维修 | 卖方: 深圳市维客修科技有限公司 | 描述 2024 JCID V1SE 编程器 WIFI 版 18 合 1 套装，适用于 iPhone 6-15 Pro Max 维修。JC V1SE iPhone 代码读取编程器，适用于 iPho... |
 |
JCID-D11 多功能数字检测器，带 JC 智能维护图 | 卖方: PHONEFIX technology Co.,Ltd | 描述JCID-D11 数字检测器用于测量 PCB 板电压、电阻、二极管值、短路等。JCID-D11 多功能数字检测器支持蓝牙连接 JC 智能绘图，并与手机维护系统 JC 维护图配合使用。JCID... |
 |
Top Bend 10*3mm Ultra Thin IP65 Flex Neon Strip | 卖方: PANERALUX LIGHTING(NINGBO) CO.,LTD | COB linear strip with IP65 protection level, the most advantage is the ultra-thin, only 3mm thick... |
