BS5852 Flammability Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

◆UK Regulation British furniture (fire and safety) regulations test

◆BS 5852 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources

◆CFR 1634 Standard for the flammability of residential upholstered furniture; Proposed rule.

◆ISO 11925-2 – Reaction to fire tests for furniture

Features

◆Stainless steel sample frame.

◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.

◆Heat-resistant wire mesh structure.

◆Stainless steel ignition tube.

◆Stainless steel test template.

◆Digital display, the accuracy of the numerical display is 0.01cm.

◆Standard wood, standard sponge and standard cigarettes.

Parameters

Test mode	Automatic
Test flow	(45±2)m1/min
Air pressure
The length of air pipe	Length 2.5~3mm, Inner diameter 7±1mm
Timer	0~999s
Power supply	AC 220V 50/60HZ
Dimensions	570x310x440mm(L x W x H)
Weight	20kg

Test Procedures

This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).

During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).

Other supplier products

	FPC Flexibility Endurance Tester (for FPC Flex Durability Tester)	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioni...
	Aviation Propulsion Fuel Test System，Aircraft engine fuel test equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aviation Propulsion Fuel Test System is a precision testing platform designed for evalu...
	Sole Sand Bath Heat Insulation Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The sand bath component of the Shoe Heat Insulation Tester is primarily used to evaluate th...
	Laser compression testing equipment supplier	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 7759-2008: Determination of compression set of rubber and rubber produc...
	Car Washer Jet Durability Testing Equipment for Automotive Quality Control | Factory Direct China	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters ParameterDetails Test Unit Dimensions 2030 × 25...

供应产品

Same products

	Nylon High Strength Sewing Thread	卖方: Hangzhou Fantex Textile Co., Ltd	Nylon high strength sewing thread(nylon thread) selects high toughness nylon filament as raw mate...
	HMPE Yarn	卖方: Hangzhou Fantex Textile Co., Ltd	Fantex high strength polyethylene yarn is a premium HMPE Yarn(High Modulus Polyethylene Yarn), re...
	Nylon Fishing Twine	卖方: Hangzhou Fantex Textile Co., Ltd	Our nylon fishing twineis made from high tenacity nylon twine , ensuring a long-lasting and relia...
	High Tenacity Polyester Bonded Thread	卖方: Hangzhou Fantex Textile Co., Ltd	High Tenacity Polyester Bonded Threadis a kind of industrial filament sewing thread made of high ...
	Nylon Multifilament Yarn 6	卖方: Hangzhou Fantex Textile Co., Ltd	PA6 Multifilament Yarnis a high-strength, continuous syntheticnylon yarncomposed of multiple fine...