BS5852 Flammability Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
◆UK Regulation British furniture (fire and safety) regulations test
◆BS 5852 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
◆CFR 1634 Standard for the flammability of residential upholstered furniture; Proposed rule.
◆ISO 11925-2 – Reaction to fire tests for furniture
Features
◆Stainless steel sample frame.
◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.
◆Heat-resistant wire mesh structure.
◆Stainless steel ignition tube.
◆Stainless steel test template.
◆Digital display, the accuracy of the numerical display is 0.01cm.
◆Standard wood, standard sponge and standard cigarettes.
Parameters
|
Test mode |
Automatic |
|
Test flow |
(45±2)m1/min |
|
Air pressure |
|
|
The length of air pipe |
Length 2.5~3mm, Inner diameter 7±1mm |
|
Timer |
0~999s |
|
Power supply |
AC 220V 50/60HZ |
|
Dimensions |
570x310x440mm(L x W x H) |
|
Weight |
20kg |
Test Procedures
This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).
During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
G506 Filter Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specification for Performance of Materials Used in Medical F... |
 |
Flame Spread Calorimeter,ISO 12136 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Flame Spread Calorimeter is suitable for: Building materials: Evaluate fl... |
 |
Automotive Interior Flooring Wear Resistance Tester (VW Standard) | China Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Test Standards StandardDescription VW TL 226 Volkswag... |
 |
Catheter Balloon Inflation Diameter Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Balloon Inflation Diameter Tester is a precision device widely used in the med... |
 |
ASTM E662 smoke density tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument conforms to the following national and international standards: ... |
