SFP+ transceiver 10km SFP+10GB-LR
SOPTIC’s SFP+10GB-LR transceivers support the 2-wire serial communication protocol as defined in the SFP MSA1.The standard SFP serial ID provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information. Additionally, SOPTIC SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver.The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.
在线联系供应商
Other supplier products
 |
BIDI SFP 1.25G 1310/1550NM DDM 80KM SC connector | Production Description SOPTIC’s SFP-BD80-LC13 Small Form Factor Puggable (SFP) transceivers are compatible with the Small Form Factor Pluggab... |
 |
MTRJ Fiber Optic Patch Cord | |
 |
BIDI SFP 1.25G 1310/1550NM DDM 40KM | Production Description SOPTIC’s SFP-BD40-SC15 Small Form Factor Puggable (SFP) transceivers are compatible with the Small Form Factor Pluggab... |
|
|
SFP+ transceiver 10km SFP+10GB-LR | SOPTIC’s SFP+10GB-LR transceivers support the 2-wire serial communication protocol as defined in the SFP MSA1.The standard SFP serial ID prov... |
 |
1.25Gb/s SFP Transceiver 100km | SOPTIC’s SFP-1.25G-EZX-LC Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing A... |
Same products
 |
SWIR CAMERAS | 卖方: GHOPTO | What Is SWIR Camera? Specialist in SWIR imager Indium Gallium Arsenide (InGaAs) imaging technolo... |
 |
GH-VSW640Pro-U2 & GH-VSW640Pro-Gnet SWIR Camera | 卖方: GHOPTO | GH-VSW640Pro-U2 & GH-VSW640Pro-Gnet SWIR Camera The short wave infrared cameraseries is base... |
 |
MCF Multicore Fiber Fanout | 卖方: Zhongshan Meisu Technolody Co.,Ltd | Multicore Fiber Fanout, or the so-called MCF Fiber, is a special optical fiber with multiple core... |
 |
Mini PM Coupler (5:95) | 卖方: Zhongshan Meisu Technolody Co.,Ltd | Designed and produced by MEISU, this mini PM fiber coupler can split the input power stably in th... |
 |
Fiber Stub | 卖方: Sumbexauto | Fiber Stub is a ceramic (zirconia) capillary assembled with optical fiber. It is the most importa... |
