SFP+ transceiver 10km SFP+10GB-LR
SOPTIC’s SFP+10GB-LR transceivers support the 2-wire serial communication protocol as defined in the SFP MSA1.The standard SFP serial ID provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information. Additionally, SOPTIC SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver.The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.
Other supplier products
|
SC/UPC Connector 1x4 PLC Fibre Optic Cable Splitter For FTTX |
DescriptionPLCsplitterisatypeofopticalpowermanagementdevicethatisfabricatedusingsilicaopticalwaveguidetechnology.It has the characteristics of smal... |
|
BIDI SFP 1.25G 1310/1550NM DDM 40KM |
Production Description SOPTIC’s SFP-BD40-SC15 Small Form Factor Puggable (SFP) transceivers are compatible with the Small Form Factor Pluggab... |
|
10G SFP+ transceiver |
SOPTIC’s SFP+10GB-SR Small Form Factor Pluggable (SFP+) transceivers are compatible with SFF-8431,SFF-8432 and support 10G Ethernet SR and 10... |
|
BIDI 10G SFP+ transceiver |
Digital Diagnostic Functions
SOPTIC’s SFP+10GB-DB40-D is hot pluggable 3.3V Small Form-Factor transceiver module .It designed expressly for ... |
|
MPO Fiber optic patch cord |
MPO Connector patch cord
Fiber Optic Patch Cord is important of optical network.they have same or different connectors which are installed on the ... |
All supplier products
Same products
|
MCF Multicore Fiber Fanout |
Seller: Zhongshan Meisu Technolody Co.,Ltd |
Multicore Fiber Fanout, or the so-called MCF Fiber, is a special optical fiber with multiple core... |
|
Mini PM Coupler (5:95) |
Seller: Zhongshan Meisu Technolody Co.,Ltd |
Designed and produced by MEISU, this mini PM fiber coupler can split the input power stably in th... |
|
Fiber Stub |
Seller: T&S COMMUNICATIONS CO., LTD. |
Fiber Stub is a ceramic (zirconia) capillary assembled with optical fiber. It is the most importa... |
|
1×2 or 2×2 Wide Band Coupler (WBC) |
Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. |
WideBand Coupleris also know as wideband directional coupler, which is built to split the optical... |
|
WDM Rack Mount |
Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. |
The server cabinet shall consist of welded and assembled steel frame construction, supporting com... |