Test for Flammability of Materials
Introduction
Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a thin sheet or woven material which is sufficiently pliable to be inserted into the test apparatus by hand withoutspecial softening treatment,
Standard
AS1530.2 Test for flammability of materials.
so that it may be graded according to a flammability index.
Apparatus
Two parallel brass rails, light gauge angle section which is formed in length to be slightly convex, with location pin;
All other frames made of stainless steel material;
A533.4mm scaler is fixed to one side of the mounting frame, with 21 equally space and 25.4mm apart;
Two stainless steel wire alone location pin with lightly tension to a held specimen in position;
Ignition copper trough, with an internal dimension of 20mmx10mmx3mm, with brass support, height-adjustable.
Stainless steel flue and hood;
4 thermocouple, type K, positioned symmetrically within the flue, 570mm above the test specimen;
1 thermocouple, type K, positioned in the control box, monitor ambient temperature;
Labview software with DAQ module for temperature record and the Area (A) calculation;
在线联系供应商
Other supplier products
 |
Wool Shrinkage Tester | Product Introduction: 1. YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard t... |
 |
Geotextile equivalent aperture tester (wet sieve method) | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by wet screen method. The geotextile samp... |
 |
Computer-controlled Helmet Impact Tester | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact... |
 |
Metal Bone Screws Torque Tester | Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
Same products
 |
Adjustable flame length tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 5169.5: Electrical & E... |
 |
Fabric Flame Retardant Tester | 卖方: 上海千实精密仪器 | Product details A method is used to determine the damaged area and the length of the damage when... |
 |
Burning Manikin System | 卖方: 上海千实精密仪器 | Product details The burning manikin system is used to test the overall thermal protection perfor... |
 |
Steel Structure Fireproof Coatings | 卖方: 上海千实精密仪器 | Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel struc... |
 |
Building material combustion calorific value calorimeter | 卖方: 上海千实精密仪器 | Product details Building material combustion calorific value calorimeter Mainly used for the det... |
