Line pipes
Line pipes
Standard: According to API Spec 5L standard.
Use: Used as oxygen, water, and oil delivery pipe in oil and natural gas industry
Steel grade:
•PSL1: A25,A,B,X42,X46,X52,X56,X60,X65,X70
•PSL2: B,X42,X46,X52,X56,X60,X65,X70,X80
Type: Seamless line pipe
Weld pipe(SAW and ERW)
Size:
Wall thickness: 2.77mm ~ 18.26mm
Seamless line pipe OD ≤13 3/8”
Weld pipe line pipe OD≥13 3/8”
Length: R1/R2/R3
Dimension Tolerance：
Steel Pipe Specification Steel Pipe Outside Diameter（D） Steel Pipe Wall Thickness（S）
Pipe Body Steel Pipe Outside Diameter (mm) Allowable deviation (mm) Steel Pipe Outside Diameter (mm) Allowable Deviation (mm)
≥60.3andS＜20 ±0.75％ ≤73.0 ＋15％，－12.5％
≥60.3andS≥20 ±1.00％ ＞73.0andS＜20 ＋15％，－12.5％
＞73.0andS≥20 ＋17.5％，－10
Mechanical Property：
Standard Model Tensile Strength（MPa） Yield Strength（MPa） Yield Strength
Ratio Tensile Stretch（％） Ballistic Work
Akv（J） Heat Treatment
State
API SPEC 5L
GB/T9711.2 B ≥415 245～440 ≤0.80 22 ≥40 normalizing
X42 ≥415 290～440 ≤0.80 21 ≥40 normalizing
X52 ≥460 360～510 ≤0.85 20 ≥40 normalizing
X60 ≥520 415～565 ≤0.85 18 ≥40 normalizing
Other supplier products
|
|
Wellhead & X-mas Tree Assembly |
The well head assembly consists of three parts; casing head, tubing head and Christmas tree, which is mainly used to control the pressure of produc... |
|
|
MANUAL TONGS |
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of t... |
|
|
Valves |
Valves
Check Valve
Usually used for Kill Manifold
The sealing face of core and seat is overlaying-welded with hard alloy with erosion and corr... |
|
|
Crown Block |
The crown frame is made of high strength steel shapes.
Sheave grooves are hardened by medium frequency induction to provide extended service life.... |
|
|
Casing & Tubing |
Standard：
API SPEC 5CT Standard of American Petroleum Institute
Steel Grade:
J55, K55, N80, L80, N80-1, N80Q P110 etc．
Diamensional to... |
All supplier products
Same products
