Blind & Buried VIA PCB

Custom blind and buried vias fabricationfrom professional and experienced pcb board supplier at low cost.

First of all, we start with traditional multi-layer boards. The structure of a standard multi-layer circuit board is a process including an inner layer line and an outer layer line, followed by drilling, and metallization in the hole to achieve the internal connection function of each layer line. However, due to the increase in line density, the way parts are packaged is constantly updated. In order to allow for a wider board area, more high-performance parts can be placed. In addition to the thinner line width, the aperture is also reduced from 1 mm in the DIP jack to 0.6 mm in SMD, and further reduced to 0.4 mm or less. However, the surface area is still occupied, so that there are buried holes and blind holes.

The Buried Holes and Blind Holes are Defined as Follows

Blind Vias: A blind via is a type of via that connects the inner trace of the PCB to the trace of the PCB surface. This hole does not penetrate the entire board.

Buried Vias: Buried vias are only connected to the type of vias between the inner layers, so they are not visible from the surface of the PCB.

Advantages of Blind Buried Hole Printed Circuit Board

Eliminate a large number of through-hole designs and increase wiring density and package density;

Diversify and complicate the design of the interconnect structure of the multi-layer board;

Significantly improved the reliability of multi-layer boards and the electrical performance of electronic products.

The Following Three Points are Distinguished for Blind Buried Plate Boards

In contrast to the through hole, the through hole refers to a hole through which each layer is drilled, and the blind hole is a non-drilled through hole.

Blind hole subdivision: blind hole, buried hole (outer layer is not visible).

Distinguish from the production process: blind holes are drilled before pressing, and through holes are drilled after pressing.

Blind buried hole technology is mainly used on relatively high-end PCBs, with high technical content and high requirements for PCB board manufacturers.

Other supplier products

	Electric Power	HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain...
	Thick/Heavy Copper PCB	Thick Copper PCB Difinition and Thickness There is no exact definition of thick copper in the PCB industry. Generally, the copper thickness ≥ 2o...
	Blind & Buried VIA Hole PCB	Custom blind and buried vias fabricationfrom professional and experienced PCB board supplier at low cost. First, we start with traditional multi-l...
	Hard Gold PCB	Hard Gold PCB, immersion gold pcb, is to immerse the board in the plating tank and apply current to form a nickel-gold coating on the copper foil s...
	High Tg PCB	What is High Tg PCB When the temperature rises to a certain area, the substrate will change from "glass state" to "rubber state", and the temperatu...

供应产品

Same products

	Turbo Blower/Multistage Centrifugal Blower/Vacuum Pump	卖方: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltd is the professional blower supplier. Multistage Centr...
	China 12V Screwdrivers Supplier	卖方: Yiwu Posgit Technology Co., Ltd.	Your first choice for wholesale power tools is YDS Tool, a reputable brand in the field. As one o...
	DN50-1200mm Portable Gate Valve Grinding&Lapping Machine	卖方: 保定市润生进出口贸易有限公司	Manufacturer of Valve Grinding& LAPPING MACHINE for gate valve,globe valve,safety valves from...
	M-300 Portable Valve Lapping Machine	卖方: 保定市润生进出口贸易有限公司	Professional manufacturer of M-300 Portable Valve Grinding& Lapping Machine for lapping dia80...
	M8021 Roots Blower/Corrosion-Resistant Stainless Steel Mechanical Seal Roots Blower for Gas Boosting Conveying or Steam Recovery Mvr	卖方: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltdis the professional roots blower supplier. Series M Ro...