.

AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order

AAK hydraulic valve has a proprietary valve block anti-rust treatment technology. A special coating with a thickness of 0.02 ~ 0.03 mm is plated on the surface of the hydraulic valve block. The coating has excellent adsorption, is not easy to fall off and has a bright appearance. On this point alone, it has crushed most of its peers. After several communications, Russian customer resolutely placed an order with AAK.

Due to the limitation of process, most hydraulic valve factories adopt surface painting or conventional electroplating for the anti-rust treatment of the hydraulic valve block surface. Such anti-rust treatment on the surface of the valve block will cause problems in the routine maintenance or repair of the hydraulic valve in the future. It is mainly reflected in that the valve block is easy to be scratched, causing corrosion and increasing system pollution. Besides, falling paint and other sundries are also easy to enter the valve block channel and bring pollutants directly to the system, resulting in secondary pollution of the system and accidents. The trouble is that it is generally difficult to find the problem of rust prevention on the surface of these valve blocks in the short term.

Anatoly, a Russian hydraulic customer, purchased a batch of hydraulic valve blocks in March from a factory. There were no problems in the preliminary test and final inspection. However, he continued to receive feedback from consumers in the last month. After setting up and debugging, the surface of the valve block fell off paint, rusted, and even there is pollution inside the system. According to the statistics of the information received, among the 200 products purchased, there are nearly 100 products in this situation now, and only 100 are still on sale. Anatoly found something wrong and immediately asked to suspend the sales of the remaining products. At the same time, he communicated with suppliers for many times for these inferior products, but the supplier's attitude was very bad and had always been unable to give accurate solutions.

Anatoly used to interact with us on the B2B platform. We didn't know the problems of his valve block until we received his last month. For these problems, we talked about the current hydraulic market in the reply to his . In order to save costs, many peers use very conventional anti-rust treatment on the valve blocks. There are mainly two processes:

  1. Directly paint the valve block surface after assembling the components. During component disassembly, replacement and maintenance, it is very easy to damage the paint around the component. At the same time, the fallen paint and other sundries are also easy to enter the valve block duct and cause system pollution

  1. After all the valve blocks are processed, a layer of oxide film plating is carried out. The surface oxide film is relatively thin, which is easy to be scratched, causing corrosion and increasing system pollution.

Anatoly asked if we have a way to eradicate it completely. We also encountered these similar valve block problems in the early stage. Our technical team did not follow the trend and insisted on new process exploration, so that AAK has its own unique anti-rust technology now. With the increasing requirements for product aesthetics and pollution control, AAK hydraulic valve adopts the proprietary valve block anti-rust treatment technology, electroplating a special coating with a thickness of 0.02 ~ 0.03 mm on the surface of the valve block. At the same time, the coating has excellent adsorption, not easy to fall off and has bright appearance. Only at this point, it has crushed most peers.

Perhaps Anatoly has already had a sense of trust in us. He sent their valve block drawings and also the valve blocks produced by last hydraulic valve factory, asking us to produce 500 trial orders directly according to these requirements, to make up for the stock shortage caused by the defective products.

AAK hydraulic valve block is free of rust and pollution. You can also try a small order!



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Meticulously production attitude, American customer finally chose to cooperate with AAK
Meticulously production attitude, American customer finally chose to cooperate with AAK Meticulously production attitude, American customer finally chose to cooperate with AAK 5 years ago, Mike was the backbone of a hydraulic valve co...
20 Manufacturers Dared Not Accept The Hydraulic Valve Block Order, But AAK Solved It With URMA Reaming Technology
20 Manufacturers Dared Not Accept The Hydraulic Valve Block Order, But AAK Solved It With URMA Reaming Technology AAK hydraulic valve, adopts URMA reaming technology of Swiss quality to process the valve spool hole in the hydraulic valve block. With the precisi...
Is it 35% cheaper than AAK hydraulic valve? American customer is cheated and then return to AAK to place orders
Is it 35% cheaper than AAK hydraulic valve? American customer is cheated and then return to AAK to place orders Is it 35% cheaper than AAK hydraulic valve? American customer is cheated and then return to AAK to place orders 2 years ago, an American customer ...
The fit clearance between AAK valve and valve sleeve is 30% smaller than peers, the Portuguese customer orders half a year later
The fit clearance between AAK valve and valve sleeve is 30% smaller than peers, the Portuguese customer orders half a year later AAK strictly controls the fit clearance between the valve and the inner hole of the valve sleeve. For hydraulic valves with valve diameter less tha...
AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company
AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company AAK relief valve hydraulic system has pressure for 100%, successfully save VIP customer of a California company Caleb is the purchasing manager of...
供应产品

Same products

More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago
More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago 卖方: AAK INDUSTRY CO., LTD Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system ...
AAK Hydraulic Pressure Valve Has No Horn Hole, Which Saved US$80,000 Order for Adair
AAK Hydraulic Pressure Valve Has No Horn Hole, Which Saved US$80,000 Order for Adair 卖方: AAK INDUSTRY CO., LTD AAK hydraulic pressure valve has no horn hole. In Ningbo, the hydraulic valve production base, fe...
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes 卖方: AAK INDUSTRY CO., LTD Kaden, a hydraulic valve purchaser from the United States, has been successfully purchasing hydra...
The Damping Hole of AAK Pressure Valve does Not Block, Colin Transferred Order to AAK The Next Day
The Damping Hole of AAK Pressure Valve does Not Block, Colin Transferred Order to AAK The Next Day 卖方: AAK INDUSTRY CO., LTD AAK pilot hydraulic pressure valve adds welded high-strength filter screen at the inlet section o...
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes 卖方: AAK INDUSTRY CO., LTD AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with th...