Precision Instruments & Embedded Electronics PC Video Surveillance Used Shock Protection JMZ-T Rubbe

Precision Instruments & Embedded Electronics PC Video Surveillance Used Shock Protection JMZ-T Rubbe

The JMZ-T seriesvibration-damping sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the wire rope isolators, this model is small and tinny, which has no worrying about the space limits.

The max static load of the JMZ-T Series anti vibration mount is from 1.4kg to 2.8kg, which can be specially used in many precision equipment and system in helicopter, motor, embedded electronics, etc.

The JMZ-T Series can also be used in the very narrow spaces to meet the mountable environmental requirements. This new type friction damper is the very selection for the limits of the space under some special situations.

• 
  Vibration Curve of JMZ-T Series:

• 
  
  

• 
  
  Impact Curve of JMZ-T Series:

• 
  

An earthquake is caused by the motion of the ground whichcauses the forced vibration of a building that is still at rest on the ground, resulting in internal forces, deformation and displacement in the structure. Vibrational isolation is an isolated earthquake, To isolate or dissipate vibration energy by setting a control mechanism at the base or at a certain location of buildings and structures to avoid or reduce the transmission of vibration energy to the upper structure, reduced the vibration response of the structure, so that only minor motion and deformation of the building can be realized during the earthquake to ensure the safety of buildings. In isolation technology, foundation isolation technology is a hot newtechnology in the world. The base isolation technology is widely used, it is especially suitable for medium-and low-rise brick-concrete buildings and reinforced concrete buildings.

What is the basic vibration isolation technology

Traditional vibration isolation structure mainly utilizes plastic deformation and energy dissipation of the main structure to dissipate vibration energy after yielding，therefore, the performance requirements of these regions are particularly important. Once these areas have problems due to certain factors, it will affect the vibration resistance of thestructure seriously, even produce serious damage. And thefoundation isolation is to set a layer of isolation with sufficient reliability between the superstructure of the building and the top of the foundation to separate the superstructure from the foundation, and blocks the propagation ofvibrationwaves to the superstructure, so that the vibration energy of the input structure is absorbed by the energy dissipation elements of the isolation layer,therefore, it will reduce the vibration response of the superstructure greatly, so that ensure the safety of the building.

The basic principle of base isolation technology

According to the experiment, if the period of the structureis prolonged and a large damping is given, it will greatly reduce the acceleration response on the structure. At the same time, large displacements to the structure can be provided by an isolation layer between the bottom of the upper structure and the top of the foundation. In this way, the superstructure will move close to translation during the earthquake, so the safety degree of the superstructure is greatly improved, which is the principle of base isolation. It is shown in the curve of the structural reaction spectrum below. From the acceleration response spectrum of figure (a), we can see that the acceleration response of the structure decreases with the prolongation of the period, so that the inertia force acting on the structure is reduced; but from the displacement response spectrum of (b), the period is prolonged and the displacement response is increased. If a damping device is introduced into the structure, the displacement response of the structure can be reduced, and the corresponding acceleration response can also be reduced.

Other supplier products

	JMZ-1-2.0B Rubber & Metal Anti Vibration Mount	JMZ-1-2.0B rubber vibration absorber belongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good ...
	GH-30G Military Defense Vibration Isolator	Wire rope isolators are also called wire vibration isolators, which are comprised of stainless steel stranded cable threaded through aluminum retai...
	JMZ-T Rubber & Metal Anti Vibration Mount	The JMZ-T series anti vibration mount is the new designed model, which is designed especially for the military use. Comparing with the wire rope is...
	Difference between the Stainless Steel Splint and the Aluminum Splint of Wire Rope Shock Absorber	Difference between the Stainless Steel Splintand the Aluminum Splint of Wire Rope Shock Absorber Wire rope isolator mounts has been widely used in...
	JMZ-1-1.5B Rubber Anti Vibration And Shock Absorbing Mounts	JMZ-1-1.5Ashock isolation mountbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good impact...

供应产品

Same products

	Miniature Carbide Face Grooving Bar Tools Cutter	卖方: 株洲煜杰合金材料有限公司	A mini carbide boring bar is a cutting tool used in machining operations to enlarge or smooth out...
	Mechanical wire splicing machine	卖方: 816004	产品链接： ?spm=a2747.manage.0.0.43a771d2oI3OwA 特征： 加工线材铆接，快速，有效。 采用铜带压接连接，取代传统焊接方式，无冷焊、空气焊、空气污...
	Registered Jack Crimping Machine	卖方: 816004	product link:
	Multi-Application Wire Rope Vibration Isolator	卖方: Xi\'an Hoan Microwave Co., ltd	Among all of wire rope isolator manufacturers, Hoan is proud to release multi-application wire ro...
	Military Wire Rope Vibration Isolator	卖方: Xi\'an Hoan Microwave Co., ltd	This defensemotor vibration isolatorswire isolator are now widely used in the field of military v...