Universal abrasion resistance tester for textiles
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM D3885： Standard Test Method for Abrasion Resistance of Textiles - Curved-Surface Method (Bending and Abrasion Method)
ASTM D3886： Standard Test Method for Abrasion Resistance of Textiles - Pneumatic Diaphragm Method (Pneumatic Diaphragm Apparatus)
ASTM D3514： Test Method for Pilling Resistance and Other Surface Changes of Textiles (Elastic Pad Method)
AATCC 119 ：Color Change Due to Flat Abrasion (Sanding): Wire Mesh Method - Textile Resistance to Flat Abrasion Colorfastness (Frosting Effect)
AATCC 120 ：Color Change Due to Flat Abrasion (Sanding): Emery Cloth Method
FTMS 191 Method 5300 ：Test Method for General Abrasion Resistance of Textiles
FTMS 191 Method 5302 ：Test Method for General Abrasion Resistance of Textiles
Features
1. Fully automatic testing mode with automatic counting, automatic shutdown upon completion, and audible alert. Clamp-style specimen fixation enables rapid sample replacement to enhance testing efficiency.
2. Compact structural design facilitates mobility and adaptability, meeting diverse practical application requirements.
3. Accurately delivers material abrasion performance test results, supporting flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, frosting, edge sealing, and napping resistance tests.
Parameters
| Parameter | Specification |
|---|---|
| Test Mode | Automatic (ensures accurate, repeatable results; no operator evaluation required) |
| Gripping Device | Advanced design, maintains constant sample tension |
| Test Heads | Flat-grinding (inflatable membrane wear test method) + mill-grinding (includes required weight and initial abrasive) |
| Built-in Features | Timer and mechanical cycle counter |
| Table Configuration | Reciprocating table, with flat-grinding / mill-grinding test head mounted on top |
| Clamping Ring Inner Diameter | 94 mm |
| Lock Ring Height | ≤ 9.5 mm |
| Speed | 120 ± 15/min |
| Moving Stroke | 25 mm |
| Air Pressure | 62 kPa (9 psi) |
| Dimensions (L × W × H) | 330 × 500 × 460 mm |
| Weight | 33 kg (72 lb) |
| Power Supply | 120/230 V, 50/60 Hz, 2A / 1A |
Test Procedures
1. First, prepare the accessories and test samples.
2. Using the sample wrench, disassemble the fixture. Place the drum membrane and sample into the fixture, tighten, and secure the fixture.
3. Secure the abrasive to the upper fixture and attach the weights.
4. Turn on the instrument, enter the operation interface, set the number of cycles, and adjust the air pressure value.
5. As air pressure increases, the sample expands to a certain height. Lower the upper fixture to bring the abrasive into contact with the test specimen.
6. Press the start button to initiate continuous friction between the abrasive and the test specimen.
7. When the sample wears through, the test automatically stops. Turn off the instrument to end the test.
8. Remove the test specimen for analysis and comparison to evaluate the material's surface wear resistance.
在线联系供应商
Other supplier products
 |
ASTM D3512 Random Tumble Pilling Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Random Tumble Pilling Tester is a precision instrument specifically desig... |
 |
High Temperature Creep Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The High Temperature Creep Test Machine is designed for evaluating the long-term creep, end... |
 |
Cell thickness gauge | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Cell Thickness Gauge is a precision measuring instrument designed for accurate thicknes... |
 |
Photovoltaic module insulation resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Insulation Resistance Tester is a precision instrument designed for... |
 |
Sliding bearing PV friction testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test m... |
