NGM-5.1 CNC Control Rail Profile Grinding Machine
NGM-5.1 CNC Control Rail Profile Grinding Machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency.
Other supplier products
|
Contact Rail( Third Rail) Gauge |
Contact railgauge, also called third railgauge, is a special measuring instrument for measuring the guide height of contact rail (the vertical ... |
|
Hydraulic Rail Turnout Tamping Machine |
YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the see... |
|
Frog and Switch Point Grinder |
The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be ... |
|
1520mm Digital Track Gauge |
Digital Track Gauge is a special digital design railway measurement instrument. It is used for measuring the track gauge, check rail gauge, back to... |
|
Rail Opening Gauge |
Rail opening gauge is mainly used for measuring turnout opening and offset gauge. Small design and convient to use for some special meauring po... |
供应产品
Same products
|
36V智能锂电钢轨钻孔机 |
卖方: 842518 |
智能锂电钻孔机,采用恒功率的专利技术,确保了电机对扭矩输出的控制功能,加上3KW超大功率,让恒速钻孔轻松实现。既保证钻孔的快速,又防止操作者用力过猛对钻头和电机造成损伤。LED转速报警灯可以实时... |
|
内燃钢轨钻孔机 |
卖方: 842518 |
内燃钢轨钻孔机,是适用于铁路工务、工程部门钻制钢轨鱼尾板螺栓孔的专用机械。适合于对P65、P75钢轨的钻孔作业。它以小型汽油机为动力,经过专用减速器减速,带动钻杆旋转。采用手柄驱动齿轮、齿条实现... |
|
72V便携式锂电锯轨机 |
卖方: 842518 |
超强劲无刷直流电机,最大功率大于8KW,切割高效
60轨,切割时间小于90秒
整机13公斤,超轻设计。电池7公斤,搬运和充电时,可从整机上拆分下来。
超长续航,一次充电,可以切割6个头(6... |
|
K1270切轨机 |
卖方: 842518 |
具有切割精度高,切割速度快,可以左右切割的特点。 独特的镁铝合金锯片罩,重量轻,切割钢轨后无铁屑残留,延长了锯片罩的使用寿命。 |
|
内燃切轨机 |
卖方: 842518 |
内燃切轨机是我公司根据现场施工单位实际要求,最大限度减轻重量,提高切割速度,新一代内燃切轨机;是铁路工务.桥梁.线路大修等部门理想的钢轨切割工具。惯用,线路的维修。抢修。特别是无电源的地段和区间... |