Pneumatic marine fender
Pneumatic marine fender
Pneumatic marine fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorb between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water.
Different types of pneumatic marine fender
1.Net Type
Net-type fenders are covered with a chain net, wire net or fiber net for small size fenders. Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
2.Sling Type
Sling-type fenders Φ500×1000L - Φ4500×9000L have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.
Features ofpneumatic marine fender
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender.
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
(6)Florescencepneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.
Advantages of pneumatic marine fender
*Easy and fast to deploy;
*Very low reaction and hull pressure;
*Performance adjustable by varying initial pressure;
*Suitable for areas with large or small tides;
*Maintains large clearances between hull and structure;
*Optional chain-tyre nets for heavy duty applications;
*Low maintenance.
Application of pneumatic marine fender
Pneumatic marine fenders are suitable for many applications including:
*Tankers, Gas Carriers and Bulk Cargo Ships;
*Fast ferries and aluminum hulled vessels;
*Temporary of permanent installations;
*Rapid response and emergency fendering;
*As stand-off fenders to realign ships with shore facilities.
在线联系供应商
Other supplier products
Heavy duty boat ship moving airbag for lifting salvage | Ship moving airbag Advantages of ship moving airbag 1.Qingdao Florescence specializes in the production of ship moving airbag sin... | |
Dia1.5m L3.0m ship pneumatic fender to Indonesia | Dia1.5m L3.0m ship pneumatic fender to Indonesia Pneumatic fender which is made of synthetic-cord-reinforced rubber sheet with compressed ai... | |
Dia1.5m L2.5m fishing boat pneumatic floating fender | Pneumatic rubber fenderhas been in use for around 50years. It is the leading anti-collision device for marine application in the world. This compre... | |
Marine rubber buffer docking pneumatic fender factory | Introduction of marine rubber buffer docking pneumatic fender price Yokohama fender which is made of synthetic-cord-reinforced rubber sheet with co... | |
Dia1.5m L2.0m ship dock pneumatic rubber fender to America | Application of Dia1.5m L2.0m ship dock pneumatic rubber fender to America Pneumatic rubber fender used f... |
Same products
三维移动定位车造船合拢设备 | 卖方: 837294 | 北京中海时代科技有限公司是专业从事中外高科技产品的企业。 涉及领域有船舶、航海、工业、科研、通信、能源、交通等,主要客户方向:造船厂、修船厂、航运公司、船东、制造厂、科研所等企业。 公司... | |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | 卖方: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping | |
50 ,026,60,4*0.32,14-69-107,16,40,70, 261.1112110-01,273.1112110-20 | 卖方: 泗洪唐尼发动机配件有限公司 | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... | |
7×0,25×130,7×0,25×140,7×0,25×155,7×0,3×130,7×0,3×140,7×0,3×170,7×0,35×140 | 卖方: 泗洪唐尼发动机配件有限公司 | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... | |
8x0,42x150 : 6CH 31/36 (D67) 8×0.3×140 | 卖方: 泗洪唐尼发动机配件有限公司 | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |