Dia1.5m L3.0m 50KPA marine rubber fender for STS service
1.What is marine rubber fender?
Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships or between ships and berthing structures when they come alongside each other on the water.
2.Two types marine rubber fender
1)Sling-type fender:fender which is designed to be used without a protection net.
2)Net-type fender:fender which is covered by a protection net consisting of chain and with tyres or rubber sleeves.
3.Structure of marine rubber fender
1)Outer rubber layer
Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
2)Inner rubber layer
liner of a rubber membrane that seals the pressurized air inside the fender.(In general,we will make some inner rubber container in advance and inflate them.few days later,we will test the pressure again.The one which it's pressure did not change is good one.We will put it into store and when clients order we can use it directly.
This can ensure every fender we send to client is airtight one)
3)Synthetic-tyre-cord layer for reinforcement layer
layer made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.
4)Flange opening
which is mounted on the fender to which an air valve can be adapted.(our flange are all embedded welding, very stable)
5)Initial internal pressure
Air pressure at which an uncompressed fender operates.
4.Marine rubber fender use matters needing attention
1 Pneumatic pressure control in±5% of the rated pressure
2 Test pressure normally, add pressure in a timely manner
3 Avoid contact with sharp objects
4 When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dryventilated place.
5 Storage place away from heat, acid and alkali, oil and grease
6 When store, shall not be folded and piled up
5.The purpose of marine rubber fender
1 Ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes with wind and waves. Adopting pneumatic fender as the buffer can not only makes heavy berthing easy, but also improves the efficiency of the transportation operations. Pneumatic fender is mainly used for Ice in the Antarctic ocean fishing ships and large oil tanker berthing.
2 Used for terminal dock protection
Because of the large size of the ship, the berthing impact energy has multiplied.Inflatable rubber fender are widely used because of its high energy absorption and low reaction force features.
6.Application of marine rubber fender
Ship to ship transfers at seas.
Double banking operation as well as vessel to berth at dock/jetty.
Oil & gas tankers
Fast ferries & aluminum vessels
Temporary and permanent installations
Rapid response and emergencies
Liquid cargo and naval defense vessels
7.How to inflate marine rubber fender?
8. The storage of marine rubber fender
1.When not using for a long time,wash the surface of the fender,dry up and fill in sufficient right amount of compressed air to lay them in a cool.dry and well-ventilated place.
2.The storage place of pneumatic rubber fender should be far away from hear source
3.Try to keep fender away from acid,alkali,grease and organic solvents
4.When not applying the fenders,the pneumatic rubber fender can't be piled up and heavy items can't be piled on the fender
Qingdao Florescence Rubber Products Co.,Ltd
Qingdao Florescence Rubber Products Co.,Ltd is s a comprehensive marine supply enterprise, integrating the scientific research design, product development with technical services. We specialize in manufacturing Marine Fender, Foam Fender, Landing Ship Floating Airbag and other rubber products. Our products conform to International Certification. Our mission is to promote customers' development, to help customers bigger and stronger and strive for the country's prosperity.
在线联系供应商
Other supplier products
Ship to berthing Dia1.5m L3.0m marine pneumatic rubber fender to Kuwait | Pneumatic fender Ship to berthing Dia1.5m L3.0m marine pneumatic rubber fender to Kuwait Pneumatic rubber fenders have become an ... | |
Pneumatic marine fender | Pneumatic marine fender Pneumatic marine fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable... | |
Dia0.5m L1.0m different colors foam filled fender for ship to ship | Dia0.5m L1.0m different colors foam filled fender for ship to ship Foam filled fender is a kind of constructive fender with polyurea m... | |
BV certificated cylindrical pneumatic floating fender for dock | BV certificated cylindrical pneumatic floating fender for dock ♦ Qingdao Florescence specializes in the production of pneumatic fender... | |
ship /vessel/boat safety yokohama rubber fender | Florescence is a leading manufacturer for ISO17357 pneumatic rubber fender/pneumatic fender/boat fenders, a leading anti-collision device for marin... |
Same products
Agri Flex Textile Fire Hose | 卖方: Zhejiang Fengruichen Fire Fighting Equipment Co., Ltd. | AgriFlex is a textile hose suitable for agricultural irrigation spray guns, industrial and mining... | |
Pip conveyor belt | 卖方: ZHEJIANG FUDA RUBBER CO.,LTD | Features(Pip conveyor belt):Excellent flexibility , high speed, large angles of inclination trans... | |
Special Rubber timing belt | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Special Rubber timing belt The rubber timing belt uses high-quality imported neoprene as the main... | |
PVC Spray Hose | 卖方: SUZHOU SEAPEAK CO.,LTD | PVC Spray Hose PVC spray hose is composed of double polyester and three PVC layers, so can work ... | |
PVC Gas Hose | 卖方: SUZHOU SEAPEAK CO.,LTD | PVCGas LineHose Apply to: convey gas and liquid under low pressure. Specially suitable for LPG-6... |