jmy506 iic i2c uart interface hf rfid reader and writer modules
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
- Qualifications:
- • PCD: NXP RC522, RC523
- • Working frequency: 13.56MHz
- • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- • RF standard: ISO14443A, ISO14443B
- • Operating distance: 80mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default OFF
- • EEPROM: 512 Bytes
- • Interface: IIC&UART(selected by SPS pin, recommend to use IIC)
- • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- • Max.command length: 254 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC 5.0V
- • Power consumption: 50mA
- • Dimension: 42mm×21mm×8mm
- • Package: DIP32
- • Weight: about 15g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Send product request
Other supplier products
 |
JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module | JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compli... |
 |
hf 13.56mhz rfid reader/writer LCD display with arm7 mcu - mr800 | MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User c... |
 |
usb hid interface hf 13.56mhz rfid reader - mr761 | MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
 |
RS232C interface HF RFID Reader/Writer Module JMY612 | JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactle... |
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
Same products
 |
Invengo RAIN RFID Fixed Readers | Seller: Invengo Information Technology Co.,Ltd. | As a RFIDcompany, Invengo offers customers a wide range of global protocol compliant RAIN RFID (U... |
 |
YOYIK supplies Acquisition Module ADAM-4024 | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | YOYIK® Data Acquisition Module ADAM-4024 is a popular product from Yoyik. Dongfang Yoyik Engi... |
 |
RFID ISO Contact IC Card | Seller: Shenzhen DTB RFID Co., Ltd. | Description ofRFID ISO Contact IC Card Mifare ic card, rfid ic card, contact ic cardhas a large s... |
 |
RFID Irregular Size Card | Seller: Shenzhen DTB RFID Co., Ltd. | em4305 card,tk4100 card t5577 card/ t5577 rfid card Description ofRFID Irregular Size Card RFID ... |
 |
RFID Inlay | Seller: Shenzhen DTB RFID Co., Ltd. | RFIDdry inlayis an important material in the production process of RFID products. Normally, rfid ... |
