RS232C,USB interface HF RFID Reader/Writer Module JMY611
JMY611 series are RFID reader/writer module which have various functions and support multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card, this let user operate the cards with full function by sending simple command. Though the module and antenna are separated design, but the impedance between RF module and antenna was tuned by impedance analyzer, therefore the module has excellent performance and stability.
- Qualifications:
- • PCD: NXP RC500, RC531, RC632, RC400
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 70mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default ON
- • EEPROM: 512 Bytes
- • Interface: RS232C , USB , UART
- • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- • Power supply: DC 5.0V
- • Power consumption: 150mA
- • Dimension: 80mm×60mm×11mm
- • Weight: about 70g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Other supplier products
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
|
RS232C interface HF RFID Reader/Writer Module JMY612 |
JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactle... |
|
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... |
|
hf 13.56mhz ISO15693 ID reader - mr760 |
MR760 series, based on NXP SL RC400, is the desktop reader. The reader supports series IC cards according to ISO15693, and the reader imitates the ... |
|
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 |
JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
All supplier products
Same products