rs232c and usb interface hf 13.56mhz rfid reader/writer - mr780
MR780 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 3 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset.
- Qualifications:
- • PCD: NXP RC500, RC531, RC632, RC400
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 100mm (MIFARE One, typical distance)
- • SAM card slot: 3 slots, (supported ISO7816 T=0 and T=1)
- • Interface: RS232C or USB (build-in CP2102 USB to UART converter)
- • Baud rate: BPS
- • Power supply: DC5V
- • Power consumption: 0.9W
- • Dimension: 123mm×88mm×25mm
- • Weight: about 100g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • PC software: TransWin
- • SDK&program: VC, VB, C++ Builder, DELPHI, Power Builder
Other supplier products
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY680 |
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of cont... |
|
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
|
|
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... |
|
|
LED Nixie tube with 8 bits LED display HF 13.56MHz RFID Reader/writer - mr600 |
MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which with 8 bits ... |
All supplier products
Same products
