.

100G QSFP28 BREAKOUT AOC

T&S Communication TSQSS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic qsfp28 patch cordSR4 for 100G Ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber without FEC, or 300 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. As a professional AOC factory, T&S produces our 100G QSFP28 series with consistently high quality.

Features of 100g qsfp28 aoc

Electrical interface compliant to SFF-8436 and SFF-8431

850nm VCSEL laser and PIN photo-detector

Built-in digital diagnostic functions

Operating case temperature 0℃ to 70℃

Hot Pluggable

Similar to the other AOC cables produced by T&S, such as our 40G AOC, our 100G breakout AOC cable is also RoHS-compliant

Applications of qsfp28 fiber cable

100GbE and 25GbE break-out applications for Datacom switch and router connections

100G to 4×25G density applications for Datacom and Proprietary protocol applications, Datacenters

For more about optic communication, contact us.



Send product request

To: T&S COMMUNICATIONS CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

QSFP+ 40G SR4 400M
QSFP+ 40G SR4 400M The 40G QSFP SR4-400m module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems...
FBG Temperature Sensor
FBG Temperature Sensor SEN-T004 Sensor measures the temperature by utilizing the inherent feature of heat-sensitivity of FBG. All the capsulation is specially designed to...
STANDARD FIBER OPTIC CABLE PATCH CORD
STANDARD FIBER OPTIC CABLE PATCH CORD Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies include...
GRADE B PATCH CORD
GRADE B PATCH CORD T&S grade B patchcord is the patchcord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB ra...
WDMS
WDMS T&S is an expert in manufacturing Wavelength Division Multiplexing (WDM). Our WDM fiberoptic products are relied upon by some of the large scal...
All supplier products

Same products

SFP28 25G Copper Twinax Cable XM DAC
SFP28 25G Copper Twinax Cable XM DAC Seller: Wuhan Gearlink Technology Co., Ltd. SFP28 Direct Attach Cables (25g sfp28 dac) are compliant with SFF-8432 and SFF-8402 specification...
SFP28 25G 1310nm 10km DDM LC Transceiver
SFP28 25G 1310nm 10km DDM LC Transceiver Seller: Wuhan Gearlink Technology Co., Ltd. SYSP8A10D SFP28 lrtransceivers, according to 25 Gigabit Small Form Factor Pluggable “SFP28&...
SFP 155M 1550nm 80Km LC Transceiver
SFP 155M 1550nm 80Km LC Transceiver Seller: Wuhan Gearlink Technology Co., Ltd. GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver mod...
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver Seller: Wuhan Gearlink Technology Co., Ltd. The SFP-10G-BX40 series single mode sfp transceiveris a small form-factor pluggable module for du...
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver Seller: Wuhan Gearlink Technology Co., Ltd. SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber...