CUCW-N142 Unitized Curtain Wall
Model No. CUCW-N142 is a self-designed, tested, and certificated unitised curtain wallingsystem by CAS team. It is a cost efficient and performance unitised curtain wall system, which combines minimal aesthetics with structural stability. Its structural silicone glazing construction offers maximum transparency at the external surface of the facade. Modular units, including glazing panes, are prefabricated in workshop conditions and this results in a fast and economic installation with minimum manpower and tooling requirements. This construction mode, renders CUCW-N142 an ideal unitised systemfor high rise buildings,where meeting demanding deadlines is a prerequisite.
Overview of CUCW-N142 Unitized Curtain Wall
System |
Unitized Curtain Wall(Non-Thermal Break) |
Model No. |
CUCW-N142 |
Material |
Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet |
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/King/CNG/TaiwanGlass |
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
Profile Brand |
6063-T5/6063-T6/6061-T6(Brackets) |
Thermal Profile |
Non-Thermal Break |
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
System Customziation |
Available |
Data of CUCW-N142 Unitized Curtain Wall
Testing Data of CUCW-N142 Unitized Curtain Wall
Test |
Pressure |
Results |
Preloading(Clause 8.2.2 of AS/NZS4284:2008) |
+1.46kpa |
No separation, plastic deformations, or deleteriousness was observed. |
-1.90kpa |
||
Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008) |
+438kPa |
There were no leaks. |
Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008) |
(Pa) |
There were no leaks. |
(Pa) |
||
(Pa) |
||
Structural Test at Serviceability Limit State Wind Pressure (Walls)(Clause 8.3 of AS/NZS 4284:2008) |
+1.46kpa |
During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
-1.90kpa |
||
Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
Water Penetration Test under Static Water Penetration Test under Static 4284:2008) |
+438Pa |
There were no leaks. |
Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008) |
(Pa) |
There were no leaks. |
(Pa) |
||
(Pa) |
||
Structural ProofTest at Ultimate Limit State Wind Pressure (Wells) (Clause 8.8 of AS/NZS 4284:2008) |
+2.26kpa |
No collapse of the test specimen was observed under the specified pressure. |
-2.94kpa |
||
Seal Degradation Test(Clause 8.10 of AS/NZS 4284:2008) |
(Pa) |
No water leakage was observed. |
(Pa) |
||
(Pa) |
Thermal Data of CUCW-N142 Unitized Curtain Wall
NFRC Procedures |
NFRC100SB, NFRC200-2010, and NFRC500-2010 |
Software Tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
Configuration |
6 CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
Panel Dimension |
1505mm Wide 2945mm High |
Frame |
Painted Aluminum |
Panel U-value |
|
Visible Light Transmission |
|
SHGC |
Frame Data of CUCW-N142 Unitized Curtain Wall
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
W/m2k |
W/m2k |
|||
Header |
||||
Left Jamb |
||||
Right Jamb |
||||
Sill |
Glass Data of CUCW-N142 Unitized Curtain Wall Manufacture
Glass Data: CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|||||||
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
W/m3k(Argon) |
|||||||
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
29 |
19 |
15 |
36 |
Benefit of CUCW-N142 Unitized Custom Curtain Wall
Guaranteed waterproofness & airtightness
Great quality control from factory
Lower on-site installation cost
Shorter project schedule
Enhancement of natural light
Increased static robustness, even in extreme natural phenomena
Minimum after sales service & maintaining
Increased comfort level
If you want to know more details of unitised facade, please visit our website.
Send product request
Other supplier products
CHD-TB85HT Hinged Door (Thermal Break) | Exterior hinged doorCHD-TB85HT, is a similar double aluminum hinged doorsystem to CHD-TB85. Due to its specially designed profiles, profiles can be... | |
Five Fixed Installation Methods Of Glass Curtain | Aluminum frame glass curtain wallis a building curtain wall with glass as panel material, which is also a common building installation method. At t... | |
CHD-TB85 Hinged Door (Thermal Break) | Hinged door CHD-TB85, is an entrance door with high-quality standards. The system includes thermal break profiles with a modern design for totally ... | |
Awning Window | custom size awning windowsare hinged on the top and open outward from the bottom, allowing for ventilation and protection from the rain. Often plac... | |
CAR-01 Aluminum Railing (Rectangular Rails) | CAR-01 is a reliable aluminium balustrade fencingsystem in rectangular shapes. Coating superior powder coating or PVDF coating with AAMA/ASTM stand... |
Same products
PTS0017-4 Fixed TV Wall Mount | Seller: Wuhu Xingdian Industry And Trading Co., Ltd. | 43 Inch LEDTVWall Mount Stand Adjustable PTS0017-4 Fixed TV Wall Mount is specially designed for... | |
CUCW-N142 Unitized Curtain Wall | Seller: CAS FACADE CO.LTD | Model No. CUCW-N142 is a self-designed, tested, and certificated unitised curtain wallingsystem b... | |
CSW-TB101D Sliding Window (Thermal Insulation) | Seller: CAS FACADE CO.LTD | CSD-TB101D is a thermal insulated aluminium glass sliding windowsystem for residential and commer... | |
CSD-TB150 Sliding Door (Thermal Insulation) | Seller: CAS FACADE CO.LTD | Wholesale Sliding Glass Patio Doors CSD-TB150 is the thermally insulated sliding system, which... | |
CSD-N150 Sliding Door | Seller: CAS FACADE CO.LTD | CSD-N150 is a non-insulated system for aluminum sliding patio doorswith a modern flat design. The... |