Heat shrinkable tube with glue
The double wall heat shrinkable tube with adhesive can shrink at lower temperature, external insulation, flame retardant, and can buffer mechanical strain and sealing property. It is mainly used in the case where the protective material does not need to be able to withstand higher processing temperature. The general shrinkage rate of double wall shrink tube with adhesive is 3 to 1, the working temperature is from -45℃to 125℃, the shrinkage temperature is≥60℃, the temperature of shrinkage used is≥105℃, flame retardant, UV proof and very soft. The double wall shrink tube with rubber of Huawoer heat shrinkable material Co., Ltd. all conform to the environmental protection standard and passed professional testing.
Other supplier products
|
|
High protection, anti-oxidation, anti ozone, anti ultraviolet Cable Cap |
High protection, anti-oxidation, anti ozone, anti ultraviolet. Internal application of hot melt adhesive to improve environmental sealing. It has g... |
|
|
RSFRM-Flame Retardant Middle Wall Tube with Glue |
The middle wall tube with flame retardant adhesive is composed of polyolefin flame retardant material and hot melt adhesive. The outer layer is pol... |
|
|
Boxed Heat shrinkable tube |
Widely used in wire connection, solder joint insulation protection, wire end treatment resistance, insulation protection of capacitors, wire mark a... |
|
|
(2X.3X)YG Yellow Green Heat Shrinkable Tube |
Yellow green heat shrinkable tubeis widely used for identification of ground wire in wire harness or cable, identification of special cable,generat... |
|
|
10KV Busbar Tube MPGL Type Heat Shrinkable Tube |
The continuous busbar protection heat shrinkable sleeve is made of environmental friendly polyclinic heat shrinkable material which is bombarded by... |
All supplier products
Same products
