4mm 8mm Dark green Reflective glass Curtain wall coated glss
PRODUCTION PROCESS:
It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chemically bonded to the surface of the glass. As this hard chemical layer is fully bonded to the glass, the reflective glass can be cut, bent, tempered, heat strengthened and laminated without affecting the coating.
FEATURE:
1. Control solar energy radiation effectively, the radiating rate is below 0.1.
2. Avoiding light pollution and adding aesthetic appeal to the structure.
3. High visible light transmittance ratio, low reflecting ratio.
4. Have good effect of heat preservation and energy saving.
SPECIFICATIONS:
Color: dark blue, dark green, F-green, bronze, dark gray, pink, silver, golden, clear, etc
Thickness:4mm, 5mm, 6mm. 8mm, 10mm
Standard sizes: 48x72,60x84,72x96,1600x2200mm, 2134x3050mm, etc
APPLICATION:
1. High grade exterior decoration
2. Curtain wall
3. Community, cultural, sports and theatre facilities.
NOTICE:
1. The glass surface towards outside, while the plating surface towards inside while installation.
2. Don’t store in outdoors.
Other supplier products
|
|
PVB 0.38mm,0.76mm,1.14mm Laminated Explosion-proof anti-theft anti-ultraviolet used for safety glass |
PRODUCTION PROCESS: It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under... |
|
|
1.8-8mm Silver Mirror/Decorative bath dressing mirror |
PRODUCTION PROCESS: Made through a chemical sedimentation process. A specially treated silver sheet is coated on quality waveless float glass, fo... |
|
|
3mm 4mm 8mm Patterned glass for door window Furniture |
PRODUCTION PROCESS: Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, e... |
|
|
3-19mm Toughened glass/Safety glass building glass for window Furniture bathromm glass |
PRODUCTION PROCESS: In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This ann... |
|
|
1.8mm 3mm Aluminum Mirror/Glass Mirror for bathromm decorative durniture dressing mirror |
PRODUCTION PROCESS: Aluminum Mirror sheet is produced through vacuum coating. Let the melt aluminum splash on the surface of clean quality float ... |
All supplier products
Same products
