Wall roll forming machine with hydraulic profile cutter
Wall roll forming machine could make wall profile steel sheet.
It could be used independently or used in whole sandwich panel line. Edge Joint Roll Former Stations (for cassette mounting of tooling)
The station consists of both upper and lower forming group being male side,female side.
Each group is adjustable by electric screw thread and indicator to allow for width adjustment for each panel type and width.
The former groups are driven both top and bottom shafts through gearing .The shafts remain fixed in the machine and rollers are interchangeable are required. The clearance adjustment between top and bottom former pairs by manual screw adjustment.
The interlocking joint roll former are supplied hardened (nitride)
The profiling station is synchronized to the encoder feed from the bottom double belt press .The maximum standard operation speed of the profiling is 8.8 meters per minute with increased speed capabilities for loading operation.Post cutting system when it be used independently.
a) Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is less material wasted.
b) Adopts welded frame for good rigidity.
c) The power of cutting is provided by hydraulic station.
Other supplier products
|
|
Mixing head with cross beam spraying PU foam |
Mixing head on cross beam(single head)
The PUR foam mixture lay down is provided by means of a mixing and foaming head mounted on acontinuously mov... |
|
|
PUR, PIR ,Polyurethane, Rock wool,mineral wool,glass wool Sandwich Panel Product Line |
PUR, PIR (Polyurethane)，Rock wool Sandwich Panel Product Line could automatically make PUR,PIR,rock wool,mineral wool,glasswool sandwich panel for ... |
|
|
Panel stacker ,stacking machine using vacuum cap crane |
Panel stacker The panel stacker lifts completed panels off a table and places the panels one on top of another to suit transport requirements. The ... |
|
|
Automatical Rock wool,mineral wool,glass wool Sandwich Panel Product Line |
Rock wool Sandwich Panel Product Line could automatically make rock wool,mineral wool,glasswool sandwich panel for wall and roof.The composing of p... |
|
|
Cross cutter with bang saw or disc saw used to cut panel |
Cross cutter with bang saw or disc saw The cross cutter saw will receive a continuous processed panel from the laminator system. The saw consists ... |
All supplier products
Same products
