MTP/MPO LOOPBACK
T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adaptercan transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopbackadapter is now widely used for optical network equipment self-test, network diagnosis, and test, etc.
Features of MTP/MPO Loopback Adapter
Available in various polarity and fiber types
Meet TIA/EIA and IEC interpretability standards
RoHS compliant
Customized attenuation available
Available with or without Pull tabs
8F , 12F, and 24fF available
Specifications of MTP/MPO Loopback
General SpecificationTechnical Specification
Construction |
Description |
|||||
Fiber Count |
2fibers for duplex type; 2-24fibers for multi-fiber connector |
|||||
Fiber Mode |
Single mode: OS2/G657 9/125umMultimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; |
|||||
Fiber Brand |
Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber |
|||||
Cable Jacket Ratings |
Low Smoke Zero Halogen (LSZH)Riser (OFNR) Plenum (OFNP) |
|||||
Cable Jacket Color |
OS2/G657: Yellow OM1&OM2: OrangeOM3: Aqua; OM4: Aqua/Magentaor Customized |
|||||
Polarity |
Type A, Type B, Type C (TIA-568.3-D) or Customized |
|||||
Connector Type |
SC LC MPO MTP |
|||||
Connector Color (SC LC) |
SM(APC) |
SM(PC) |
OM3 |
OM4 |
or customized |
|
Green |
Blue |
Aqua |
Magenta/Aqua |
|||
Connector Color (MPO MTP) |
SM(APC) |
SM(PC) |
OM3 |
OM4 |
or customized |
|
Low Loss |
Yellow |
Yellow |
Aqua |
Magenta/Aqua |
||
Standard |
Green |
Blue |
Aqua |
Magenta/Aqua |
||
Loopback housing color |
black |
|||||
Operating Temperature |
-20°C to + 70°C |
|||||
Storage Temperature |
-40°C to + 85°C |
MTP Loopbackwith Housing and Pull-tab
The MTP loopback adapter occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning.
MTP/MPO Lookback Adapter Applications
MTP®/MPO Loopback Adapter is used widely in testing applications within parallel optical 40Gbps and 100Gbps networks. The MTP loopback adapters enable verification and test of transceivers with MTP®/MPO interface like 40Gbps BASED SR4 QSFP+. MTP loopback adapters are developed to connect transceivers and a receiver port of the MTP®/MPO transceiver interface. MTP®/MPO loopback adapters do a great help in speeding up IL test of optical networks section by connecting them to an MTP®/MPO trunk.
Send product request
Other supplier products
BAND SEPARATOR WDM DEVICE | T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two p... | |
QSFP28 100G CWDM4 2K | The 100g qsfp28 er-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G... | |
56G QSFP AOC | TS CommunicationTSQS-8556G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ for 56 Gigabit Ethernet, compliant with the QSFP MSA, Inf... | |
MT FERRULE | The MT ferruleis a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and A... | |
FIBER PATCHCORD & PIGTAIL | patch cord pigtailnormally consists of optical fiber cable and connectors at both ends of the cable, the pigtail is connector assembled at one end,... |
Same products
2UUL PW02 Universal Cable For iPhone And Android Motherboard Repair | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | 2UUL PW02 iOS+Android Power Cable for iPhone 7-16 Pro Max and Android Phone Motherboard Repair. 2... | |
MECHANIC Ultra Power Cable: iPhone 6 to 16 Pro Max | Seller: PHONEFIX Technology Co., Ltd. | Description Mechanic POWER PRO ULTRA Power Cable for iPhone 6/7/8/X/11/12/13/14/15 Pro Max boot w... | |
J-100 HIGH STRENGTH DURABLE RATCHET CABLE CUTTER | Seller: Zhejiang Huaqi Information Technology Co., LTD | Model J-100 Cutting Range Cu/Al Armored cable≤3×300mm2 The dia. ≤100mm Weight 6.6kg S... | |
Mechanic Power Pro Ultra Data Boot Cable for IP 6-15PM | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description Mechanic POWER PRO ULTRA Power Cable for iPhone 6/7/8/X/11/12/13/14/15 Pro M... | |
MIJING DY-11 Phone Repair Power Cable for iPhone 8-16 iOS Android | Seller: Phonefix | MiJing DY-11 Mobile Phone Repair Power Cord with iOS & Android FPC for iPhone 8/X/11/12/13/14... |