ACREL ADL400 THREE-PHASE DIN RAIL ENERGY METER
AcrelADL400din-rail multifunctional energy meter is an intelligent instrument designed mainly for electric energy statistics and management needs of power systems, industrial and mining enterprises, and public facilities. The product has the advantages of high precision, small size, and convenient installation. It can integrate power parameter measurement and power metering and assessment management, and provide various power data statistics for the last 48 months. It has 2~31 sub-harmonic and total harmonic content detection. With RS485 communication interface, MODBUS-RTU or DL/T645 protocol can be selected. The energy meter can be widely used in various control systems, SCADA systems and energy management systems.
Specification of ADL400 3 Phase Din Rail Meter
|
Project |
Performance parameter |
||
|
Specification |
3 phase 3 wires, 3 phase 4 wires |
||
|
Measurement |
Voltage |
Reference voltage |
3×100V3×380Vac、3×57.7/100Vac、 3×220/380Vac (Can normally work under 1.2 times of rated voltage) |
|
Consumption |
<10VA(Single phase) |
||
|
Impedance |
>2MΩ |
||
|
Accuracy class |
Error±0.2% |
||
|
Current |
Input current |
3×1(6)A， 3×10(80)A |
|
|
Consumption |
<1VA Single phase rated current |
||
|
Accuracy class |
Error±0.2% |
||
|
Power |
Active, reactive, apparent power, error±0.5℅ |
||
|
Frequency |
45～65Hz，Error±0.2% |
||
|
Metering |
Energy |
Active energy(Accuracy class: 0.5) reactive energy(Accuracy class 2) |
|
|
Clock |
≤0.5s/d |
||
|
Digit signal |
Energy pulse output |
1 active photocoupler output |
|
|
Pulse |
Width of pulse |
80±20ms |
|
|
Pulse constant |
400imp/kWh,10000imp/kWh(Correspond with the basic current) |
||
|
Communication |
Interface and communication protocol |
RS485：Modbus RTU |
|
|
Range of communication address |
Modbus RTU:1~ 247； |
||
|
Baud rate |
1200bps~19200bps |
||
|
Environment |
Working temperature |
-25℃~+55℃ |
|
|
Relative humidity |
≤95℅(No condensation) |
||
Features of ADL400 Three-Phase Din Rail Energy Meter
01
It can measure all electric power parameters including voltage U, current I, active power P, reactive power Q, apparent power S, power factor PF, frequency, 31st harmonic and total harmonic content;
02
It can measure the current combined active energy, forward active energy, reverse active energy, forward reactive energy, and reverse reactive energy;
03
It can count the historical electric energy of the last 48 months (electric energy of each rate) and the historical electric energy of the last 90 days (electric energy of each rate).
Acrel Co Ltdhas long been committed to the R & D and production of products such as intelligent power monitoring, energy management, electrical safety, power quality monitoring and governance, photovoltaic new energy and environmental protection monitoring, and also has constantly adhered to the business philosophy of "creating value for customers" to provide customers with product components and system solutions of smart energy users side.
Send product request
Other supplier products
 |
ACREL AKH-0.66/K-Φ 333MV SPLIT CURRENT TRANSFORMER | ACREL AKH-0.66/K-Φ 333MV SPLIT CURRENT TRANSFORMER Acrel's Split Type Current Transformer, also known as Split Core Current Sensor, is availab... |
 |
ACREL AM2SE MEDIUM VOLTAGE RING MAIN UNIT PROTECTION RELAY | ACREL AM2SE MEDIUM VOLTAGE RING MAIN UNIT PROTECTION RELAY AM2SE medium voltage ring main unit protection relay is suitable for line protection an... |
 |
ACREL AMC72-DV DC VOLT METER | ACREL AMC72-DV DC VOLT METER AMC72-DV small dc voltmeteris often used in DC motor drive circuits, battery charging circuits, battery testing, etc.... |
 |
ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) | ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) AHKC-EKA series open-type Hall current sensor is a new generation of current sensor d... |
 |
ACREL AEW100 WIRELESS ENERGY METER | ACREL AEW100 WIRELESS ENERGY METER AEW100 wireless metering module is mainly used to measure three-phase active energy of low-voltage network. It ... |
