Single phase 6 position test system for energy meter calibration
Single phase 6 position test system for energy meter calibration
- single phase energy auto-calibration system is a new generation, high precision energy meter calibration equipment. It uses the advanced technology and electronic components available in 90 decade.The test bench can be operated from embedded keyboard or operated from PC software.
- 1) Equipped with electronic phantom load power source, assuring high stability,security and large output capacity. 2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier. 3) Equipped with RS-232C interface, can be operated from software. 4) Test results be saved to database, can be inquired from database and can be printed out
- Power supply: 220V+10％, 50Hz/60Hz Maximum power consumption: 1000VA (reference for 24 positions) Phantom load power source Technical specification Voltage output: 1x 30V (AC) – 1 x 300V (AC); Resolving power: 0.01％ of current range Current output: 0.001A (AC) – 100A (AC) Resolving power: 0.01％ of current range (min 0.0001A) Phase shift range: 0-360° Resolving power: 0.1° Frequency output: 45Hz – 65Hz Resolving power: 0.01Hz Waveform distortion (sine wave output): voltage < 0.5％ current < 0.5％ Stability of power source (sine wave output): < 0.1％ (180s) Load can be resistance / inductor or capacitance(<4uF) Output waveform: sine waveform Output capacity: Voltage source: 300VA-1500VA(dependent on meter positions) Current source: 300VA-2500VA(dependent on meter positions) 4. Reference meter Technical specification Type:KP-1100 single phase reference meter,or HY5101, HDS122-02 (Optional) Power supply: 220V +10％, 50Hz/60Hz Maximum power consumption: 20VA Measurement range: Voltage: 60V (AC) - 280V (AC) Current: 0A (AC) - 100.0 (AC) Accuracy: 0.02％ / 0.05％ / 0.1％ Warming up: 1 mins Working environment: Temperature: + 5℃～ + 40℃ Relative humidity<85％ Dimensions: 480mm X 420mm X 140mm Weight: 2.0kg
- Impulse of tested meter could be: TTL / OC / Optical head Max. frequency of impulse could be: 200Hz Error display range: 0.001％-99.99％
- 1) Single phase power source 2) Single phase meter rack (6 positions each rack) 3) KP-S1100 Reference meter 4) impulse input cable for each position 5) Rs232c communication cable, optical sensor etc. all necessary parts.
The Energy Meter Calibration Test Set is meant for on-site and in-lab testing of the electric power meters in automated settings. We offer Portable Calibration Test System and it is also a major Exporter and Supplier of Aging, Counting Test Bench. Looking forward to your calling.
Send product request
Other supplier products
 |
Porcelain Insulator | Porcelain Insulator Porcelain insulators manufactured are wet process porcelain, and used in distribution and transmission line. Porcelain line pos... |
 |
Tansformer Insulation Testing Station design | Tansformer Insulation Testing Station design We will be willing to provide whole-process engineering consulting servicesfor you: Preparingfeasibili... |
 |
Shielding hall of HV PD test | Shielding hall of HV PD test Application: HV test shielding room (faraday cage) areWidely used in power cable, transformer, transformer switch, tra... |
 |
CT & VT Accuracy Measurement Testing System----General Type | CT & VT Accuracy Measurement Testing System----General Type Ratio Error and Phase Error of the CT& PT HES Series Control Bench HES-1C ... |
 |
500kV Mobile Lab for CT/VT measurement test | 500kV Mobile Lab for CT/VT measurement test 500kVCT&PTmobile labis made up ofa truck for 220kV CT&PT error test, a 500kV van-typetrailer,te... |
Same products
 |
High voltage slip-ring motors | Seller: Hebei Changli Electric Tech. Co., Ltd. | Changli high voltage modular induction motors allow industries to operate within a wide power ran... |
 |
A4 Series High Voltage Electric Motors with GOST Standards | Seller: Hebei Changli Electric Tech. Co., Ltd. | A4 Series High Voltage Electric Motors with GOST Standards A4 Series High Voltage Motors and Y Se... |
 |
IEC Standard/ GOST Standard Medium Voltage Electric Motors/Asynchronous Motors | Seller: Hebei Changli Electric Tech. Co., Ltd. | Y (A4), YKK(DAZO) series high-voltage three-phase asynchronous motor (framesize 355~1120mm) is a ... |
 |
YE3 Series Three-Phase Asynchronous Motors | Seller: Hebei Changli Electric Tech. Co., Ltd. | Applicable scope:General-purpose places that need energy conservation and continuous operation, s... |
 |
2rb 310-7AA01 Side Channel Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ... |
