DZ47S-63 Circuit Breaker
Scope of Application
DZ47S-63 Miniature Circuit Breaker with shunt trip is suitable for AC 50Hz (or 60Hz), rated voltage 230 / 400V, rated current 63A of the line, remote control and automatic signal breaking control for the line, is mainly used for over-load and short-circuit protection in circuits. And infrequent transfer between circuits in normal condition. Currently widely used in IC card prepaid watt-hour meter to control on-off of lines.
DZ47-60 Circuit Breaker has a small size, easy installation, etc., controls residential charged meter, when the IC card recharge balance is insufficient, the control circuit breaker will automatically disconnect to play the role of power outages, and users can close the circuit after recharging.
Main functions: overload protection, short circuit protection, isolation, accept the IC card power meter signal to cut off the circuit.
DZ47S-63 Miniature Circuit Breakers meet standards of IEC60898, GB10963, GB14048.2, with the international advanced level.
Technical parameters
Rated current: 6, 10, 16, 20, 25, 32, 40, 50, 63A
Pole: 1P + N / 3P + N
Rated operating voltage: (1P + N) 230V; (3P + N) 400V
Frequency: 50Hz
Operating voltage range: (65% ~ 120%) Un
Breaking capacity: 230V (1P + N), 400V (3P + N);
Delay action time (intelligent shunt tripping time): 0.5s ~ 2s
Reset time: <30s
Mechanical life: 20,000 times
Electrical life: 4000 times, COSΦ = 0.85 ~ 0.9;
Current Limit Level: 3
Impulse withstand voltage: 6kV
Usage ambient temperature: -25°C ~ 70°C
Resistance to heat and humidity: Class 2 (relative humidity 95% at 55°C)
Normal operating conditions and installation conditions
Ambient temperature: -25°C ~ +60°C;
Altitude: The altitude of the installation site does not exceed 2000m;
Installation categories: Ⅱ, Ⅲ grade;
Installation: Mounted on the TH35-7.5 steel rail.
Other supplier products
|
|
DZ47S-63 Circuit Breaker |
Scope of Application DZ47S-63 Miniature Circuit Breaker with shunt trip is suitable for AC 50Hz (or 60Hz), rated voltage 230 / 400V, rated current ... |
|
|
TXCM1 Molded Case Circuit Breaker |
Scope of Application TXCM1 Molded Case Circuit Breaker, is new circuit breakers which have been designed and developed by the company using interna... |
|
|
TXQ3 Automatic Transfer Switch |
Scope of Application TXQ3 Automatic Transfer Switch is suitable for the power supply system of AC 50Hz, rated voltag f 400V, rated current of 63A a... |
|
|
HG2B In-line Fuse Switch Disconnector |
Scope of application HG2B In-line Fuse Switch Disconnector is suitable for AC rated voltage 660V and below, AC 160A~630A, rated AC frequency 50Hz. ... |
|
|
CJX2 Contactor |
Scope of Application CJX2 Contactor is mainly used for the circuit of AC 50Hz (or 60Hz), the voltage to 660V, the rated operating current to 95A in... |
All supplier products
Same products
